Topic: kitbash request

[Bernard Guignard]

wondering if someone could take Lord schuppts  Uss Monitor heavy cruiser which the following warp engines



And Bash the following

http://jaynz.trekships.org/images/Fed2265/Jaynz_Siva_2265.png
but move the pho-torps to the Neck  and move the warp engine forward a little more

also this in both double and single engine versions

http://jaynz.trekships.org/images/Fed2265/Jaynz_Monoceros_2265.png

[atheorhaven]

What's the secondary hull off Bernard?  Something like a Belknap?

[atheorhaven]

Well, looking at these, I think these are do-able.. it'll just be the bend on the Monocerse pylons I think..

[Terradyhne]

wondering if someone could take Lord schuppts  Uss Monitor heavy cruiser which the following warp engines



And Bash the following

http://jaynz.trekships.org/images/Fed2265/Jaynz_Siva_2265.png
but move the pho-torps to the Neck  and move the warp engine forward a little more

also this in both double and single engine versions

http://jaynz.trekships.org/images/Fed2265/Jaynz_Monoceros_2265.png

i have made a linear warp prototype engine Akula for A2, changeing it into a single-engine Saladin version would be no problem and i made a Monoceros model with two engines to.







don't have ever seen a single engine Monoceros version

if their quality is enough for you, i would be proud to give them somone willing to convert them to SFC versions. 

[Bernard Guignard]

What's the secondary hull off Bernard?  Something like a Belknap?

Hello Alec
The Drawing that I put up was just to Illustrate which warp engine the LN52 warp I was talking about 
Lord Schuppts Monitor class is an FCA with  Photon torpedos on the neck of the ship.

[Bernard Guignard]

but move the pho-torps to the Neck  and move the warp engine forward a little more

also this in both double and single engine versions

http://jaynz.trekships.org/images/Fed2265/Jaynz_Monoceros_2265.png
[/quote]

i have made a linear warp prototype engine Akula for A2, changeing it into a single-engine Saladin version would be no problem and i made a Monoceros model with two engines to.







don't have ever seen a single engine Monoceros version

if their quality is enough for you, i would be proud to give them somone willing to convert them to SFC versions. 
[/quote]

Terradyhne these are so very close   All you have to do is Move the Photon  Torpedos on the Saladin to the Neck positon
and add a second turbolift to the bridge. 

Yes well for the Monoceros all you would do is move the engine to the saucer centerline and put a support strut on each
side of the engine.  Keep the current look of the support stuts that you have in your model. 

[atheorhaven]

You make 'em Terra, I'll convert them over to SFC. 

[Bernard Guignard]

I whipped this up in Autocad yesterday its an example of what I'm looking for   



Haven't gotten around to drawing it yet but I was thinking of a couple of Strip mounted deflectors on eiither side of the
SNS Scanners on the primary hull. Atra used them on a couple of his models.

[Terradyhne]

ok than you want a Phase2 Saladin with LN52 nacelle 
yes this is even no problem for me, as i have made the models to kitbash this 

[Bernard Guignard]

ok than you want a Phase2 Saladin with LN52 nacelle 
yes this is even no problem for me, as i have made the models to kitbash this 

Thank you I greatly appreciate it

[atheorhaven]

Any updates on yours Terra?  I have one on the go (Siva) as well..

[Bernard Guignard]

Any updates on yours Terra?  I have one on the go (Siva) as well..

Wow Alec Very nicely done there. 

[Chrystoff]

No, kidding! That's very nice! 

[atheorhaven]

Not done, and this is under the "more the merrier" paradigm.  I want to get this one out (note, no torpedo launcher yet) more or less in conjunction with Terra's.  Don't want to upstage or discourage, which is why I was asking Terra about the status of his. 

(edit: Torpedo launcher I can live with is on.. my personal belief is that torpedo launchers are tied to the number of nacelles at least.  So I've modified the one on the Monitor to be a single torp launcher and then added it on.  Looks better IMO.  Also, attached a shot of it in ModViewer compared with the image I was working from..

[Bernard Guignard]

What's the secondary hull off Bernard?  Something like a Belknap?

Hello Alec
The Drawing that I put up was just to Illustrate which warp engine the LN52 warp I was talking about 
Lord Schuppts Monitor class is an FCA with  Photon torpedos on the neck of the ship.

The Secondary hull on the Battlecruiser is something I designed my self  If I ever revisit it I'd make a couple of
changes especially where the warp pylons meet.

[atheorhaven]

Haven't gotten around to drawing it yet but I was thinking of a couple of Strip mounted deflectors on eiither side of the
SNS Scanners on the primary hull. Atra used them on a couple of his models.

Bernard, can you show me what you're looking for here?  Then I can look at adding it on the Siva I'm working on. 

Monoceres hasn't been started yet, but I do have an idea of how I'm going to do that now. 

[Bernard Guignard]

Haven't gotten around to drawing it yet but I was thinking of a couple of Strip mounted deflectors on eiither side of the
SNS Scanners on the primary hull. Atra used them on a couple of his models.

Bernard, can you show me what you're looking for here?  Then I can look at adding it on the Siva I'm working on. 

Monoceres hasn't been started yet, but I do have an idea of how I'm going to do that now.

Hello Alec
 This is what I had in mind  Atrahasis did something similar on a couple of his later model destroyers and Tugs its a flush mount
deflector built on both sides of sns scanners

[BOxSee]

That last concept looks very well balanced, any more views Bernard?

[atheorhaven]

Hello Alec
 This is what I had in mind  Atrahasis did something similar on a couple of his later model destroyers and Tugs its a flush mount
deflector built on both sides of sns scanners

Okay, got it. 

Now question... I don't want my design philosophy to necessarily overrule yours.. did you want the second torpedo launcher on the ship?  Or should I do both meshes for those that want a choice?

[Bernard Guignard]

That last concept looks very well balanced, any more views Bernard?

Hello BoxSee
 I'll put up what I've done so far its still a work in process for me    among my manyt other projects. 

Hello Alec
 This is what I had in mind  Atrahasis did something similar on a couple of his later model destroyers and Tugs its a flush mount
deflector built on both sides of sns scanners

Okay, got it. 

Now question... I don't want my design philosophy to necessarily overrule yours.. did you want the second torpedo launcher on the ship?  Or should I do both meshes for those that want a choice?

Hi Alec  I'm for giving the community as much choice as they want