Topic: mackies projects (Read 52660 times)

GotAFarmYet? · « **Reply #80 on:** February 04, 2011, 06:15:57 pm »

Quote from: atheorhaven on February 04, 2011, 01:01:18 pm

and I *swear* that at least one or two days this winter are going to be "sit down at computer and fire up 3dsMax" days. My project shelf is getting too dusty..

Dusty?

more like to stop it from over flowing anymore and to get some room back in the house

Mackie · « **Reply #81 on:** February 08, 2011, 09:11:30 am »

and just because im quiet it dont mean i aint doing nothing

Mackie · « **Reply #82 on:** February 08, 2011, 11:20:59 am »

ok heres teh same ship again, i decided not to add or remove anything to or from it no more; it was slowly starting to drive me crazy so this is the final version :p

Charger class

download: can be found both in 3ds and lwo formats on my site

credits:
parts from akyazi: wz
parts from lexington: wz
parts from enterprise: khaliban
parts from akula: khaliban
retextures: foas

Klingon Fanatic · « **Reply #83 on:** February 13, 2011, 07:32:17 pm »

Where is the D/l link for the new Klingons?

Kitbash request: Atrahasis' N6 tug with ONE pod. There is a zero pod version and a two pod version but no ONE pod version.

The Northern Star · « **Reply #84 on:** February 13, 2011, 07:58:24 pm »

Quote from: Klingon Fanatic on February 13, 2011, 07:32:17 pm

Where is the D/l link for the new Klingons?

Kitbash request: Atrahasis' N6 tug with ONE pod. There is a zero pod version and a two pod version but no ONE pod version.

Do you know where I could get Atra's N6?

FoaS_XC · « **Reply #85 on:** February 13, 2011, 09:39:36 pm »

What is the N6?

The Northern Star · « **Reply #86 on:** February 13, 2011, 10:38:30 pm »

It's an SFB large tug similar to the one Terradyhne made but bigger and with a pod under each "wing".

The Northern Star · « **Reply #87 on:** February 13, 2011, 10:40:14 pm »

Oh and sorry Mackie, for hijacking your thread . . . not intended.

atheorhaven · « **Reply #88 on:** February 14, 2011, 02:02:24 am »

Got a few of these converted this weekend along with moving a guys daughter 35 miles and some remote work at my job this weekend. Will upload one as a test, want to make sure that it looks right because in Modviewer on this machine, looks like I have normals flipped or something on the quick look. (could also be just Modviewer on this machine though)..

Mackie · « **Reply #89 on:** February 14, 2011, 09:49:08 am »

Quote from: atheorhaven on February 14, 2011, 02:02:24 am

Got a few of these converted this weekend along with moving a guys daughter 35 miles and some remote work at my job this weekend. Will upload one as a test, want to make sure that it looks right because in Modviewer on this machine, looks like I have normals flipped or something on the quick look. (could also be just Modviewer on this machine though)..

alright thats fine

ive got some stuff to do right now anyway, im working on my car... tossing out most of the interior, fake wooden panels from the dash, doorpanels kickpanels seats etc... replacing panels with real wood and seats with ones from another a car

atheorhaven · « **Reply #90 on:** February 14, 2011, 05:16:46 pm »

It's Modviewer on that machine.. they look fine on another. Twister is going to be a bit of an issue to convert, there's a lot of materials on that one. But am working on it.

Shaker, Behemoth, and one more are converted now.. will work on the Twister ASAP.. (need to condense down those materials somewhat so it'll convert somehow)..

Starforce2 · « **Reply #91 on:** February 16, 2011, 07:44:08 pm »

nevermind this..

Mackie · « **Reply #92 on:** February 17, 2011, 03:51:51 am »

Quote from: atheorhaven on February 14, 2011, 05:16:46 pm

It's Modviewer on that machine.. they look fine on another. Twister is going to be a bit of an issue to convert, there's a lot of materials on that one. But am working on it.

Shaker, Behemoth, and one more are converted now.. will work on the Twister ASAP.. (need to condense down those materials somewhat so it'll convert somehow)..

once you get stuff done can you email em to me or... ?

Quote from: Starforce2 on February 16, 2011, 07:44:08 pm

nevermind this..

what?

Starforce2 · « **Reply #93 on:** February 17, 2011, 05:37:00 am »

I thought there was a model problem but it was max screwing up..restarted it and the model had all textures in the correct place. I've niffed all the models now except the challenger, I think.

atheorhaven · « **Reply #94 on:** February 17, 2011, 12:12:40 pm »

Quote from: Mackie on February 17, 2011, 03:51:51 am

once you get stuff done can you email em to me or... ?

[/quote]

Can do..

Mackie · « **Reply #95 on:** February 21, 2011, 10:43:51 am »

heres a size comparison of the more recent bashes

http://stupidfusion.com/files/g_m_s/2011_bashes_comparison.jpg

CaptCujo · « **Reply #96 on:** February 21, 2011, 01:40:14 pm »

Neat - excellant work -

Chrystoff · « **Reply #97 on:** February 21, 2011, 03:12:47 pm »

I may have missed this, but is anyone converting these to .mod format?

Mackie · « **Reply #98 on:** February 21, 2011, 04:05:22 pm »

Quote from: Chrystoff on February 21, 2011, 03:12:47 pm

I may have missed this, but is anyone converting these to .mod format?

atheorhaven is on it

Klingon Fanatic · « **Reply #99 on:** February 21, 2011, 07:19:08 pm »

Is Atheorhaven also converting the Klingon kitbashes you have done Mackie?

News:

Topic: mackies projects (Read 52660 times) var addthis_config = {"data_track_clickback":true};

Topic: mackies projects (Read 52660 times)