Topic: MarkyD shuttle thread (Klingon PF) (Read 13666 times)

markyd · « **Reply #20 on:** October 18, 2009, 09:55:40 am »

I was hoping to have the Galileo textured today so I could start on the Aeon Time Shuttle, after that the TOS Galileo, but when I looked at it before textures I realised It needed more meshing and fixing up in areas, as it was a little angular, plain and not the correct shape. So I have spent a few hours fixing her up, all I need to do now is mesh in that detail on the top, and the underside. When Finished it will be less than 900 Polies. I noticed the TNG version of this is almost identical, just with new windows, large side pods removed and a new texture scheme, so I will make both.

Bernard Guignard · « **Reply #21 on:** October 18, 2009, 10:18:51 am »

very nice work

atheorhaven · « **Reply #22 on:** October 19, 2009, 01:36:28 pm »

Quote from: Starforce2 on October 17, 2009, 01:28:28 am

I hope he does the time shuttle aeon. Nobody has done it good except redragons which never ports right.

Ported fine when I did it to SFC.. but I think I know why it didn't port over for you, it's the way that the mesh works.

Or do you mean, never ports right to BC? What all do you need to port to BC these days anyways? Send me a PM with the list, I'd like to see if I could port over to BC.. (never been bothered in the past).

markyd, *thank you* for starting this thread.. nice to see people starting to get fired up.

markyd · « **Reply #23 on:** October 20, 2009, 01:34:12 pm »

@ atheorhaven

Lol, no problem mate, look forward to seeing where this takes us.

markyd · « **Reply #24 on:** October 21, 2009, 10:11:49 am »

On going to mesh out the rear hatch detail I noticed It was the wrong shape

so I have made the adjustments, and the mesh is now 100% ( could be more accurate) but i have lots of shuttles to make

. It sits at 1200 polys which is higher than i would have liked, but for a 1200 poly shuttle i think it looks smooth and detailed, the textures on this model are quite simple when studying the studio model. So it should not take long to texture and map.

markyd · « **Reply #25 on:** October 21, 2009, 11:04:00 am »

Thanks Marc,

Question :- is this ship warp capable? I am texturing the necelles, and in all the images the grills are grey even on screenies on trek core from the "Final Frontier" where this shuttle first appeared.. leave em grey?

The TNG version has blue recesses that tells me its warp capable..

FoaS_XC · « **Reply #26 on:** October 21, 2009, 11:12:47 am »

I would say it is capable of a low-level warp. Say, limit on warp 3

markyd · « **Reply #27 on:** October 21, 2009, 12:08:50 pm »

Ok, thanks fellas, I will make some amendments,

I really need the font for the script Galileo.. anyone know what it is?? or do i have to do it by hand

markyd · « **Reply #28 on:** October 21, 2009, 12:18:59 pm »

Yeah I thought i might have too

markyd · « **Reply #29 on:** October 23, 2009, 03:53:17 pm »

Texture update

Bernard Guignard · « **Reply #30 on:** October 23, 2009, 05:51:57 pm »

Very nice job very well done

Shadowfleet · « **Reply #31 on:** October 26, 2009, 10:33:16 am »

Looking good MarkyD. Any thoughts about finishing up the long lost Arrow to release with this baby?

Stay safe and remember - the only good bad guy is the one under your sites...

atheorhaven · « **Reply #32 on:** October 26, 2009, 10:56:12 am »

Yes please, Arrow please.

If it's survived to present day of course...

markyd · « **Reply #33 on:** October 28, 2009, 09:22:57 am »

I still have the arrow.. just need the motivation to finish her

Shadowfleet · « **Reply #34 on:** October 28, 2009, 08:29:35 pm »

You'll have my undying admiration as motivation - oh wait you already have that

She was so near completion, as I remember, you only wanted to tweak a few more textures. I liked her the way she was - she was a work of art.

If you want to release her as is or with the tweaks, I'll HP/DP and convert her overnight for ya. Just send her to the email address in my profile (with any directions you prefer and what you'd like in the readme).

Come on MarkyD -- YOU CAN DO IT!

atheorhaven · « **Reply #35 on:** October 29, 2009, 02:11:12 pm »

That's it.. the Arrow isn't lost, it just took a "three hour tour, a three hour tour.."

markyd · « **Reply #36 on:** November 04, 2009, 09:00:46 am »

Lol...

Arrow, she will never go away.. I finished the galileo shuttles last week, played with some high poly stuff and im still playing with them, I dont have the Arrow on my lappy so I cant actually do any work on it until I get home, but instead of building another feddy shuttle, I thought about making a klink version of the arrow.. a big ugly fast fighter thingy. Got this one built in just 800 Polies..

Have not got time to change it to be honest, but crit is still always welcome, but im mapping and texturing as we speak, I will release this seperate to the shuttle pack, as I think the klinks need more shuttle and fighters now not in 12 months.

names welcome

FoaS_XC · « **Reply #37 on:** November 04, 2009, 09:20:45 am »

Looks like it would make a great Klingon PF!

markyd · « **Reply #38 on:** November 04, 2009, 09:26:08 am »

Whats one of them

Starforce2 · « **Reply #39 on:** November 04, 2009, 09:28:48 am »

I would like to see the scouts from armada 1, you had a cone shaped borg, the klingon, romulan talon, and venture classes.

News:

Topic: MarkyD shuttle thread (Klingon PF) (Read 13666 times) var addthis_config = {"data_track_clickback":true};

Topic: MarkyD shuttle thread (Klingon PF) (Read 13666 times)