Topic: Mirandexcelioberth-any interested? (clearly tons of interest-download up)  (Read 4131 times)

0 Members and 2 Guests are viewing this topic.

Offline Starforce2

  • Bridge Commander Ambassador
  • Commander
  • *
  • Posts: 2827
    • Nightsoft SFC File Dump
This is a kitbash I've gotten from Willey over at BCC. Awaiting confirmation, but I think he's willing to release it to sfc.
« Last Edit: January 20, 2009, 07:39:26 pm by Starforce2 »

Offline Starforce2

  • Bridge Commander Ambassador
  • Commander
  • *
  • Posts: 2827
    • Nightsoft SFC File Dump

Offline Major A Payne

  • Lt. Junior Grade
  • *
  • Posts: 296
  • Gender: Male
Starforce. I've seen very good bashes from you in the past but this look butt ugly. The miranda saucer just doesn't suit the overall size of the nacelles or engineering hull.

Offline GotAFarmYet?

  • Lt. Commander
  • *
  • Posts: 1189
Starforce. I've seen very good bashes from you in the past but this look butt ugly. The miranda saucer just doesn't suit the overall size of the nacelles or engineering hull.

Fixing the scaling issues, if it is because of windows being different sizes that is easily fixed. If you are talking the porportions of the model itself then that is a different matter
People always said they wanted the government to listen to them and now the government is listening, taking notes and names...and coming to see you soon!

America-Not the land of the free anymore...
 Its the land of the freeloaders

Remember the axiom of big government bureaucrats: If it moves, tax it. If it keeps moving, regulate it. When, finally, under the crushing weight of taxes and regulation, it stops moving, subsidize it.

Offline Centurus

  • Old Mad Man Making Ship Again....Kinda?
  • Captain
  • *
  • Posts: 8505
  • Gender: Male
I don't think this is a very good kitbash personally.

The size and design of the various components just don't really work well with each other.
The pen is truly mightier than the sword.  And considerably easier to write with.

Offline Just plain old Punisher

  • Vice Admiral
  • *
  • Posts: 36927
  • Gender: Male
  • I'm not facist, I just like wearing jackboots
::shutter:: it looks like a suppository with nacelles.

"Sex is a lot like pizza.  If you're not careful you can blister your tongue". -Dracho

Offline Centurus

  • Old Mad Man Making Ship Again....Kinda?
  • Captain
  • *
  • Posts: 8505
  • Gender: Male
::shutter:: it looks like a suppository with nacelles.

Helm, plot a course straight up the rectum.  MAXIMUM WARP!!!!
The pen is truly mightier than the sword.  And considerably easier to write with.

Offline Starforce2

  • Bridge Commander Ambassador
  • Commander
  • *
  • Posts: 2827
    • Nightsoft SFC File Dump
lol..if I said anything like this about your stuff you'd be requesting the admins to ban me. Ya'all can go suck  it..I love the ship, think it's pretty well done even if the parts don't match (I think it's his first attempt at bashing) so I am hoping more get made.

Offline Centurus

  • Old Mad Man Making Ship Again....Kinda?
  • Captain
  • *
  • Posts: 8505
  • Gender: Male
BAN SF!!  HE SAID FOR US TO SUCK IT!!

 :D :D :D :D :D :D :D :D :D :D
The pen is truly mightier than the sword.  And considerably easier to write with.

Offline Bernard Guignard

  • Cad Schematics are our Speciality
  • Lt.
  • *
  • Posts: 888
  • Gender: Male
  • Trek Canon!!! I NO believe in TreK Canon!!!.
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #9 on: February 07, 2009, 06:26:52 am »
Just wondering what the status on this one is it looks very interesting  :)

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #10 on: February 07, 2009, 11:48:59 am »
Just wondering what the status on this one is it looks very interesting  :)
What?? Bernard, I'm shocked. We need to band together and convince someone to do a really good Ingram Space Control Ship, not giant Excelsior bashes with tiny little Gagarin nacelles, lol. Join me in my Ingram Quest!! :D

Offline Bernard Guignard

  • Cad Schematics are our Speciality
  • Lt.
  • *
  • Posts: 888
  • Gender: Male
  • Trek Canon!!! I NO believe in TreK Canon!!!.
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #11 on: February 07, 2009, 01:54:26 pm »
Don't get me wrong a Really nice Ingram Class  both original and Retro-fitted as well as Jayru's Version would be really nice for Starfleet command and I'd encourage these 3d model wizards to go at it with whole heart and pixles  ;D I also think that there is room for this one as well  the more the merrier I say  ;D

Offline DeepThought

  • The Answer... 42!
  • Lt. Junior Grade
  • *
  • Posts: 52
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #12 on: February 07, 2009, 01:56:13 pm »
The Ingram shouldn't be too hard to bash... depending on which one.  I've seen several over they years, some with thinner Excelsior nacelles and some with more TMP Connie nacelles (which look out of scale).

Here's a quick and dirty mockup I did in Milkshape.  To do the job right would require a more time and some custom parts, I think (Esp. the aft end and the impulse deck).







BTW... not sure whos Excelsior this was... no readme.

-DT

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #13 on: February 07, 2009, 02:04:24 pm »
The Ingram shouldn't be too hard to bash... depending on which one.  I've seen several over they years, some with thinner Excelsior nacelles and some with more TMP Connie nacelles (which look out of scale).

Here's a quick and dirty mockup I did in Milkshape.  To do the job right would require a more time and some custom parts, I think.
Hey, DeepThought. I'd love to see you take some time and do a nice Ingram. ModelsPlease took a swipe at it, and came up with somthing very similar to this one you just did. I still use his, but I've always wanted a really good one. I hope you'll give it a go; that would be exiting.

Offline Bernard Guignard

  • Cad Schematics are our Speciality
  • Lt.
  • *
  • Posts: 888
  • Gender: Male
  • Trek Canon!!! I NO believe in TreK Canon!!!.
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #14 on: February 07, 2009, 02:06:52 pm »
Hello Deepthought
 unfortunately the Ingram would have to built from scratch based on the blueprints. Her primary hull and secondary hull have completely different contours from the Excelsior, but i can see your bash as some sort of interim design?  ;D

By the way guys I added a couple of TreknoGraphx Designs in the Ships I'd like to see Modeled Thread  ;D

Offline DeepThought

  • The Answer... 42!
  • Lt. Junior Grade
  • *
  • Posts: 52
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #15 on: February 07, 2009, 03:20:41 pm »
Hello Deepthought
 unfortunately the Ingram would have to built from scratch based on the blueprints. Her primary hull and secondary hull have completely different contours from the Excelsior, but i can see your bash as some sort of interim design?  ;D



It's something I'd like to take on a while down the road... once I'm a little more skilled at making saucers, for one thing.  Do you know where I can find better blueprints for the Ingram?  what I found at http://www.shipschematics.net/ don't really do it justice.

Thanks,

DT


Offline DeepThought

  • The Answer... 42!
  • Lt. Junior Grade
  • *
  • Posts: 52
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #17 on: February 07, 2009, 04:39:23 pm »
Thanks for the link.  Yeah... that will be a challenge. 

Offline Bernard Guignard

  • Cad Schematics are our Speciality
  • Lt.
  • *
  • Posts: 888
  • Gender: Male
  • Trek Canon!!! I NO believe in TreK Canon!!!.
Re: Mirandexcelioberth-any interested? (clearly tons of interest-download up)
« Reply #18 on: February 08, 2009, 06:57:33 am »
Thanks for the link.  Yeah... that will be a challenge.

I might be able to help you I started to draw this up as a 2d autocad file but I never finished it I do have the saucer and some of the secondary hull drawn up can you import DXF files