Topic: TNG Constitution Project (Read 47871 times)

Vipre · « **Reply #100 on:** November 06, 2007, 04:03:53 am »

Quote from: asylum on November 06, 2007, 02:46:26 am

I was also thinking about the cutaway to the underside of the hull... the excelsior class has a feature their as seen on adonis's lakota, maybe.. i'll work around that idea, what do u guys think.

Little lazy for searching and it's terribly late at the moment so anyone feel like describing the feature?

Other than minor tweaking as with the pylons and deflector piece you mentioned, the lakota feature aside for the moment, I'd say call it a day on the secondary hull. There can be such a thing as overdesigning and you've made such an elegant blend of the two eras it falls close to the quit while you're ahead line. Just my current opinion mind you so don't pay it too much heed, nothing you've done to this point has been a bad move.

Jay1886 · « **Reply #101 on:** November 06, 2007, 05:47:31 am »

My only comment is that I think you should leave out the intrepid disk and give her an ordinary blue deflector array, maybe slightly TNG'ed by making it sovy styled. I'll even see if I can whip something up for that matter.

AsYlUm · « **Reply #102 on:** November 06, 2007, 09:09:24 am »

Cool, ok show me a wip of what you had in mind, like i have said from the beginning im open to changes..

Lol.. and dont worry, apart from what I have mentioned, with the saucer and the possibility of the lakota feature http://www.dynaverse.net/forum/index.php/topic,163372713.60.html <---- seen here by adonis

The mesh is nearly complete.

I am also planning on an early release, with the model blank with just the uvw tiles fully mapped, so all those with crayons can get started the same time i do.. I will release that model first, while i spend allot of time with the texturing.

Thanks fellas.

Jay1886 · « **Reply #103 on:** November 06, 2007, 05:26:27 pm »

Here's a sovy-era dish. Feel free to use it as long as I'm credited. If not, use it for any inspiration you can get from it.

F9thDawg · « **Reply #104 on:** November 06, 2007, 05:45:08 pm »

Quote from: Jay1886 on November 06, 2007, 05:26:27 pm

Here's a sovy-era dish. Feel free to use it as long as I'm credited. If not, use it for any inspiration you can get from it.

Very Very nice design. Me like

Jay1886 · « **Reply #105 on:** November 06, 2007, 05:58:43 pm »

Thanks, a bit of the dish I had in my mind for my De Ruyter class if I'd ever finish it.

Starforce2 · « **Reply #106 on:** November 06, 2007, 06:05:52 pm »

nice dish.

F9thDawg · « **Reply #107 on:** November 06, 2007, 09:41:13 pm »

I have been giving some thought how bout an aft observation lounge bejhind the main bridge similar to the Ent-D and E

AsYlUm · « **Reply #108 on:** November 10, 2007, 12:26:12 pm »

so thats the mesh complete with the additions of docking ports as asked for by dawg, simplified central deflector area, forward observation lounge, rear observation lounge, necelle pylon lower fix.

Im gonna map the saucer section 2nite and start texturing.. should be able to post some progress shots too..

thanks fellas, for ur patience and input

Vipre · « **Reply #109 on:** November 10, 2007, 01:35:09 pm »

Stunning

Red_Sharif · « **Reply #110 on:** November 10, 2007, 02:24:08 pm »

Quote from: Vipre on November 10, 2007, 01:35:09 pm

Stunning

Hear! Hear! As mentioned before, this model is a real work of art.

Adonis · « **Reply #111 on:** November 10, 2007, 03:02:39 pm »

Ok, as I red back on this thread, I have a suggestion besides the one I mentioned on BCC.

Since she's definetly an Ambassador era ship, I'd suggest the coloring of the Ambassador too, as I did with my TNG version of the Joshua that I posted pix of below. I'll give you the hex codes of the colors if you'll go with it. Oh and get to MSN lol

Red_Sharif · « **Reply #112 on:** November 10, 2007, 04:29:05 pm »

Quote from: Adonis on November 10, 2007, 03:02:39 pm

Ok, as I red back on this thread, I have a suggestion besides the one I mentioned on BCC.

Since she's definetly an Ambassador era ship, I'd suggest the coloring of the Ambassador too, as I did with my TNG version of the Joshua that I posted pix of below. I'll give you the hex codes of the colors if you'll go with it. Oh and get to MSN lol

With all due respect, that tan coloration would not be flattering, imo, on this ship.

Vipre · « **Reply #113 on:** November 10, 2007, 06:06:16 pm »

The two-tone grey just inside the tan is my vote. I'd base the palette totally on the Galaxy class. Or satin white, love that Excelsior wip

Adonis · « **Reply #114 on:** November 10, 2007, 07:32:01 pm »

Quote from: Vipre on November 10, 2007, 06:06:16 pm

The two-tone grey just inside the tan is my vote. I'd base the palette totally on the Galaxy class. Or satin white, love that Excelsior wip

The popular belief is that the Lakota is satin-white too, which is innacurate, she's duck-egg. the Mike Okuda Ambass scheme is a variation on that theme which I like a lot. Some pictures depict that one with the two gray-blue colors from that Joshua of mine, some with the pale-yellow/lighter gray blue where the dark one is used as an outline of the light gray blue.

AsYlUm · « **Reply #115 on:** November 11, 2007, 06:09:41 am »

Lol... ill show a wip of the saucer section a little later... then ya can all get ur bats out

AsYlUm · « **Reply #116 on:** November 11, 2007, 08:22:44 am »

OK So firstly i appologise for the size of the image.. but it is needed, secondly i am expecting a mass of mixed opinion... and i will listen to what u guys have to say as i have all the way through, but im pretty set on the design of the textures..

Im still working on it, no reg as of yet.. any ideas?? and i will post more later on.. this is very early and i still have so much work to do on the top saucer.. i hope some of u like the idea / theme...

oh... and when its released i have no objections for retextures and or kitbashes

thanks fellas

oh... whats the feeling on windows? it will be slightly bigger than the original connie, so would windows on the upper saucer sit well or not?

rengers · « **Reply #117 on:** November 11, 2007, 09:27:51 am »

I like it very much, great work so far

!

AsYlUm · « **Reply #118 on:** November 11, 2007, 09:42:49 am »

thanks man..

ok...

the neck has the same texture theme.. the idea is to create the whole ship, basic.. like this.. then really add the detail and make it unique

Jay1886 · « **Reply #119 on:** November 11, 2007, 10:47:36 am »

Windows, yes.. on top indeed, though maybe only the outer edge of the saucer.

News:

Topic: TNG Constitution Project (Read 47871 times) var addthis_config = {"data_track_clickback":true};

Topic: TNG Constitution Project (Read 47871 times)