Topic: Can't get online (Read 1859 times)

steven2601 · « **on:** August 28, 2007, 04:49:19 pm »

ok so i've spent hours trying to config my ports on my router now i finally got em to open but it still won't connect to the outside address or my ip adress now i've disabled my firewalls and don't know what else to do can anyone help...my router is a netgear dg834g v3

Centurus · « **Reply #1 on:** August 28, 2007, 05:20:01 pm »

First off, which game are you trying to play online? SFC2, SFC:OP, or SFC3?

steven2601 · « **Reply #2 on:** August 28, 2007, 07:03:55 pm »

i'm trying to get on sfc3 but my router only does 2 ports which do i do?

Centurus · « **Reply #3 on:** August 28, 2007, 07:20:33 pm »

Quote from: steven2601 on August 28, 2007, 07:03:55 pm

i'm trying to get on sfc3 but my router only does 2 ports which do i do?

Did you get the beta patch for the access servers? The D3 access servers were handed over to D.net, so you need to install the beta patch to redirect the game to the new access servers.

If you've already got that beta patch, try enabling DMZ on your router.

steven2601 · « **Reply #4 on:** August 28, 2007, 07:50:40 pm »

yeah i did enable dmz and i got the patch in the right place it starts the query but doesn't connect to my outside ip or to my computer's ip adress

FCM_SFHQ_XC · « **Reply #5 on:** August 28, 2007, 07:59:32 pm »

Are you able to connect without using the router?
There are just some routers that just wont function properly with Dynaverse connections, while others work perfectly fine.

steven2601 · « **Reply #6 on:** August 28, 2007, 08:00:59 pm »

well i'm on a network and my brother plays star wars galaies so i kinda stuck

FCM_SFHQ_XC · « **Reply #7 on:** August 28, 2007, 08:15:06 pm »

heh, well if you can, try to connect not behind the router just to test once. Make sure if you have a modem like I have, you also have the ports forwared for D3 on there as well, as some modems, especially newer ones, have some routing functions going on instead of bridging functions. NAT is the function to look under for the modem, and be sure that it is at least set to SUA only if not Full Feature(depending on the model the mode name NAT is in may vary). NAT has always caused problems with connectivity but if your modem does "route" then you need to forward there as well.
Now if you have one of those modems that really doesnt route, and you can connect then its your router. Some routers are better then others, D-link for example seems to not like to connect to D2, yet Linksys seems to be OK with D2. Dont know too much about netgear routers though :/

GFL Offkey · « **Reply #8 on:** September 03, 2007, 11:41:14 pm »

ports 2302 tcp and udp
2303 tcp and udp
6303 tcp and udp

News: