Topic: Pico-ITX for really small form factor systems  (Read 1121 times)

0 Members and 1 Guest are viewing this topic.

Offline Nemesis

  • Captain Kayn
  • Global Moderator
  • Commodore
  • *
  • Posts: 13067
Pico-ITX for really small form factor systems
« on: August 19, 2007, 06:02:55 am »
Link to site

Quote
The VIA EPIA PX mainboard is the first commercial mainboard based on VIA's Pico-ITX form factor measuring just 10cm x 7.2cm. Designed to enable x86 to be built into embedded systems where it was previously impractical for space reasons, the VIA EPIA PX provides a full complement of multimedia and connectivity options on a platform smaller than any standard mainboard or x86 system on module.


Quote
The VIA EPIA PX Pico-ITX mainboard also supports flexible hard drive storage options, with one SATA and one UltraDMA 133 connector, as well as 10/100Mbps Fast Ethernet through the RJ-45 LAN port, an LVDS/DVI connector and extensive connectivity options including USB2.0, COM and PS2. A multimedia connector supports external TV-out, video capture port interface & LPC interface (an add-on card is required), while an audio connector supports line-out, line-in, mic-in, S/PDIF in & 7.1 channel audio output.


Roughly 4" x 3" for those not metric literate.  I read of this in a magazine and it had a picture with the heat sink (fan less so quiet) and the heatsink obscured almost the whole motherboard.  So far there does not actually seem to be a case marketed for this style of motherboard. 

For people who want small and quiet and high performance is not needed this should be an excellent little system. 
Do unto others as Frey has done unto you.
Seti Team    Free Software
I believe truth and principle do matter. If you have to sacrifice them to get the results you want, then the results aren't worth it.
 FoaS_XC : "Take great pains to distinguish a criticism vs. an attack. A person reading a post should never be able to confuse the two."

Offline jualdeaux

  • The Quiet One
  • Global Moderator
  • Commander
  • *
  • Posts: 2758
Re: Pico-ITX for really small form factor systems
« Reply #1 on: August 19, 2007, 09:25:45 am »
I see this as having more appeal to more commercial uses when a smaller format would work better than a full desktop, or even one of the current smaller footprint, case.
Only in America .....do we use the word 'politics' to describe the process so well: 'Poli' in Latin meaning 'many' and 'tics' meaning 'bloodsucking creatures'.

Offline Nemesis

  • Captain Kayn
  • Global Moderator
  • Commodore
  • *
  • Posts: 13067
Re: Pico-ITX for really small form factor systems
« Reply #2 on: August 19, 2007, 11:30:36 am »
Partially I agree.  This however will be of use to hobbyists who want the small and quiet, MythTV users for example or robotics hackers.  Also those who have limited needs such as just an Internet "terminal" for example.  Computerized home security.  Local network web server (without monitor, keyboard or mouse).  General all around "geek" toy.

This is small enough that it could be built into a keyboard and just plugged into a monitor thus minimizing the desktop space used up.  (If you use a power brick rather than integrated PSU).

It likely will show up without people even knowing it.  I read recently of a small unit in England that sits between your computer and the Internet and acts as firewall, virus scanner and spam scanner.  The unit was actually a small computer running Linux.  A unit such as this could be made to do that job and many others. 
Do unto others as Frey has done unto you.
Seti Team    Free Software
I believe truth and principle do matter. If you have to sacrifice them to get the results you want, then the results aren't worth it.
 FoaS_XC : "Take great pains to distinguish a criticism vs. an attack. A person reading a post should never be able to confuse the two."