Topic: Klingon Deathbird TMP refit available  (Read 3650 times)

0 Members and 1 Guest are viewing this topic.

Offline Terradyhne

  • Lt.
  • *
  • Posts: 687
    • Terradyhne-yards
Klingon Deathbird TMP refit available
« on: August 23, 2004, 09:36:48 am »
ok now my model  of the Klingon Deathbird TMP refit is available at my site
http://www.terradyhne-yards.de




"there will be no better worlds with human presence as mankind tends to ignorance, intolerance and selfishness, despite they tell you about themselves"

Offline Wolfsglen

  • Starship Mutilator
  • Lt. Junior Grade
  • *
  • Posts: 206
  • Gender: Male
Re: Klingon Deathbird TMP refit available
« Reply #1 on: August 23, 2004, 10:03:59 am »
That is awesome, thanks Terra  :thumbsup:

Offline Rhaz

  • Lt. Junior Grade
  • *
  • Posts: 374
Re: Klingon Deathbird TMP refit available
« Reply #2 on: August 23, 2004, 10:34:29 am »
Very cool!  Thanks Terra!

Offline Klingon Fanatic

  • Lt. Commander
  • *
  • Posts: 2070
  • Gender: Male
Re: Klingon Deathbird TMP refit available
« Reply #3 on: August 23, 2004, 11:30:07 am »
 ;D Thanks Terradyhne!

D-18 Refit status?

KF
HoD Radjekk Vor Thruum
IKV Kraag Dorr
SuvwI' Qeh KCC
Commander, Task Force Kraag Dorr's Teeth First Strike Squadron

Offline Rogue

  • Lt. Junior Grade
  • *
  • Posts: 134
Re: Klingon Deathbird TMP refit available
« Reply #4 on: August 23, 2004, 01:33:25 pm »
I snagged it immediately. Nice addition for the Klingon's and thanks offered for the new model. You have been making some very fun starship models and this will make for a yet better Klingon selection for their vessel library.

About what size is the Deathbird and is there a particular UI that you set it up for?

Offline Terradyhne

  • Lt.
  • *
  • Posts: 687
    • Terradyhne-yards
Re: Klingon Deathbird TMP refit available
« Reply #5 on: August 24, 2004, 04:56:16 am »
I snagged it immediately. Nice addition for the Klingon's and thanks offered for the new model. You have been making some very fun starship models and this will make for a yet better Klingon selection for their vessel library.

About what size is the Deathbird and is there a particular UI that you set it up for?

the deathbird TOS is the size of the D-7 and is an heavy destroyer and i used the same thing for TMP refit so its an D-7 sized heavy destroyer  :)
i used the KCA hardpoints for it and its named K-DBR, i forgot to add the Shipedit file to the zip but if you want it, i could send it to you

KF the status of the D-18 is that its on hold but i think i get back to work on it in the next days, i had some bad problems with Milkshape so i could not work on the D-18 and now those problems are eliminated and i finished the models that don't need so much work first



"there will be no better worlds with human presence as mankind tends to ignorance, intolerance and selfishness, despite they tell you about themselves"

Offline Rogue

  • Lt. Junior Grade
  • *
  • Posts: 134
Re: Klingon Deathbird TMP refit available
« Reply #6 on: August 24, 2004, 04:15:24 pm »
I snagged it immediately. Nice addition for the Klingon's and thanks offered for the new model. You have been making some very fun starship models and this will make for a yet better Klingon selection for their vessel library.

About what size is the Deathbird and is there a particular UI that you set it up for?

the deathbird TOS is the size of the D-7 and is an heavy destroyer and i used the same thing for TMP refit so its an D-7 sized heavy destroyer  :)
i used the KCA hardpoints for it and its named K-DBR, i forgot to add the Shipedit file to the zip but if you want it, i could send it to you


Thank you for the information and the model, Terradyhne. I like the geometry of this model and I intend to find a place for it. So, I need to choose a specification that it represents. I might drop you a PM with my email address for the Shipedit file. Does that mean that it is modeled from a source I am unfamiliar with? I don't tend to look at the starship museum websites so I probably haven't noticed it. Never the less it is another nifty model to your credit and this model hound appreciates you making it available to us.

Offline Starforce2

  • Bridge Commander Ambassador
  • Commander
  • *
  • Posts: 2827
    • Nightsoft SFC File Dump
Re: Klingon Deathbird TMP refit available
« Reply #7 on: August 27, 2004, 02:13:41 am »
what is the role of that Bertaa? Looks like a  torp cruiser or something?

Offline Chris Johnson

  • I used to be a Captain a forum or two ago...
  • Lt.
  • *
  • Posts: 817
  • Gender: Male
  • Hai! Hai!
Re: Klingon Deathbird TMP refit available
« Reply #8 on: August 29, 2004, 10:24:53 pm »
It had a lot of disruptor banks, I forgot how much, but was plenty, and had about five forward torp tubes, and two, or three rear disruptor banks, two on starboard or port?  She was like a faulty torpedo battlecruiser/heavy dreadnought... The key weaknesses in her was actually the warp nacelles.  I forgot which for each action, but if you hit and destroy a specific warp engine on the Ber'taa, she'll either be disabled or will explode to bits... I'm not exactly sure on it, but she's tough if you're a newbie to her, or if Klingons actually fixed the inner-workings so she's doesen't have a weakness as exploitive as the Death Star's. ;)

"Oh, shut up!" -- Wil Wheaton to Wesley Crusher

Offline Terradyhne

  • Lt.
  • *
  • Posts: 687
    • Terradyhne-yards
Re: Klingon Deathbird TMP refit available
« Reply #9 on: August 30, 2004, 02:05:54 am »
the Bertaa should have been the  new cruiser design for the Klingons in SFA but was a fail, mine is more the long awaited refit of it with more power and deadly as a dreadnought and the size of it makes it a dreadnought or supercruiser



"there will be no better worlds with human presence as mankind tends to ignorance, intolerance and selfishness, despite they tell you about themselves"

Offline Roguewing

  • Ensign
  • *
  • Posts: 1
Re: Klingon Deathbird TMP refit available
« Reply #10 on: May 09, 2007, 05:19:31 pm »
It's a really nice mesh.
May look into getting it myself.
Have a clarification for you though.
The original design was done by Patrick T. Riley and can be found here:
http://users.sisna.com/roguewing1/schematics/trek-klin-rom/deathbird.html

Offline Rod ONeal

  • D.Net Beta Tester
  • Commander
  • *
  • Posts: 3592
  • Gender: Male
Re: Klingon Deathbird TMP refit available
« Reply #11 on: May 09, 2007, 05:35:05 pm »
Nice job, TD. Once again you show us low poly modeling at it's best. 790 polies!  :notworthy:
If Romulans aren't cowards, then why do they taste like chicken?

Offline Don Karnage

  • Lt. Commander
  • *
  • Posts: 2327
  • Gender: Male
Re: Klingon Deathbird TMP refit available
« Reply #12 on: May 09, 2007, 10:11:39 pm »
ok now my model  of the Klingon Deathbird TMP refit is available at my site
http://www.terradyhne-yards.de




with its wings the ship look like a romulan bid of prey  ;D

nice ship  ;)