Topic: How one hook up a server to the internet through a router (Read 1876 times)

IAF Lyrkiller · « **on:** January 19, 2007, 07:05:40 pm »

Ok, here is my setup, server is hooked up to my Linksys router.

Need help. If you need anymore info I will provide it.

Just plain old Punisher · « **Reply #1 on:** January 19, 2007, 08:07:58 pm »

You need to setup port forwarding on the router...to open up the necessary ports on the router so outbound/inbound traffic from the internet can reach the server.

First you need to know which TCP/UDP ports your server needs in order to function. Check your routers help information on how to set up port forwarding.

IAF Lyrkiller · « **Reply #2 on:** January 19, 2007, 10:02:32 pm »

Quote from: Punisher NCC-2000 on January 19, 2007, 08:07:58 pm

You need to setup port forwarding on the router...to open up the necessary ports on the router so outbound/inbound traffic from the internet can reach the server.

First you need to know which TCP/UDP ports your server needs in order to function. Check your routers help information on how to set up port forwarding.

Trying not to sound like I am a dummy, how would I check for the TCP/UDP in my server?

Tus-XC · « **Reply #3 on:** January 20, 2007, 01:55:44 pm »

it depends on what you are trying to do. if your server was just to host a teamspeak then you would open up the corrisponding TCP/UDP

IAF Lyrkiller · « **Reply #4 on:** January 20, 2007, 08:36:07 pm »

My router right now is handling all of the DHCP for my network. The server will not.

Oh, I wish Bonk was here.

NOTE:The server will just be handling hosting my pics.

MrCue · « **Reply #5 on:** January 21, 2007, 12:19:18 am »

If the server is running on default ports, you need to forward port 80.
If your router has a web interface you will need to change the port it runs on.

IAF Lyrkiller · « **Reply #6 on:** January 21, 2007, 08:59:42 am »

Thank you MrCue, that is as much as I gathered.

IAF Lyrkiller · « **Reply #7 on:** January 21, 2007, 09:07:55 am »

My server is NOW online.

Funny looking though, I have not installed the drivers just yet.

Just plain old Punisher · « **Reply #8 on:** January 23, 2007, 03:40:12 pm »

Quote from: CayneG on January 19, 2007, 10:02:32 pm

Quote from: Punisher NCC-2000 on January 19, 2007, 08:07:58 pm
You need to setup port forwarding on the router...to open up the necessary ports on the router so outbound/inbound traffic from the internet can reach the server.

First you need to know which TCP/UDP ports your server needs in order to function. Check your routers help information on how to set up port forwarding.

Trying not to sound like I am a dummy, how would I check for the TCP/UDP in my server?

Depends on what sort of server you're running. Web servers use port 80. Mail servers port 23.

IAF Lyrkiller · « **Reply #9 on:** January 24, 2007, 06:23:11 pm »

Pun, my server is up and running on the internet. Now all I need is some how to host my sig and pics.

News: