Topic: federation TOS heavy cruiser (Read 2207 times)

Don Karnage · « **on:** August 10, 2006, 11:58:07 am »

almost all the pics are from atra's fed ship, i kinda made 2 to 3 new ship.

the following images are just one of 3 of each ship, since atra's web site is empty i offer this mod and my variant to anyone who want them, if i had a website i could upload them to it but i don't have one and he don't want his mod to be at the battleclinic or any mass mod website, so i will send them by email to anyone who want them.

so here a description of each ship/mod:

Achernar early, i use the texture of the Achernar on other mod from atra and made a early version of it, the engine tips hase a different color to match a new engine, i only show one of each to show the change.

the bonhomme Richard middle is in the middle of the time, you can see the difference in the color of the tips of the engines.

the constellation (from the doomsday machine) a late version of it (none damage ship except for a small spot on the saucer)

the constitution old, all the ship are old-middle and late eras

the declaration (original from atra) and the drawing of it

the original drawing and my version of the declaration.

the declaration as a constitution class

the endeavor old, its like the Achernar.

the Potemkin

the republic

and for last 2 damage constellation, the first one is from atra and the other one is from lordshups

also i have the damage mod from both also

exadvent · « **Reply #1 on:** August 10, 2006, 08:41:56 pm »

I think that they are great. Perhaps you could release them through a private shipyard, like Staryards. Or check with Outlance Shipyards about getting space through them. I do not know their policy on new members, but then you would have a place to release other models or bashes that you make. Check the forum for contact information, I know that Models Please is a member. Also I believe that Battleclinic hosts files that are not in the Community Docks. Other than that I would put them together in a compressed archive file (like .zip or .rar) to make it easier to send them by private E-mail.

I hope that I have not taken liberties with Outlance's name but I think that you guys are some of the best out there and that getting hooked open with you is one of the smartest things that a new modeler can do.

Don Karnage · « **Reply #2 on:** August 11, 2006, 05:35:45 am »

well i just want a place to upload the kitbash and texture change of the mod so there will be available to everyone .

Don Karnage · « **Reply #3 on:** August 11, 2006, 07:29:53 am »

well WZ and Atra don't want there model or kitbash to be upload to place like battleclinic, so i need a place where its ok with them to upload there model and or kitbash.

Centurus · « **Reply #4 on:** August 11, 2006, 11:25:12 am »

I know WZ doesn't mind kitbashes of his work posted at SFC3Files.com. I've posted several bashes myself there, and asked WZ if he had a problem with them hosted there. He had no problem. I would just ask him in a PM or e-mail if he's alright with you posting your work on SFC3Files. Same with Atra.

Don Karnage · « **Reply #5 on:** August 11, 2006, 08:07:00 pm »

Well i can't send a email to WZ cause Outlook Express wont accept it, for atra there no repond to the email.

Heavens Eagle · « **Reply #6 on:** August 14, 2006, 09:32:41 pm »

Just a FYI

While I know you are proud of your desktop, you can get a screen shot of JUST the model viewer by pressing ALT+ PrtSc. This takes an image of the current application. This will also make for smaller pics which will load faster.

As for the ship model, it looks quite nice. Don't forget the "rust ring" on the upper surface of the dish

Don Karnage · « **Reply #7 on:** August 15, 2006, 09:44:51 am »

As for the ship model, it looks quite nice. Don't forget the "rust ring" on the upper surface of the dish

Quote

what "rust ring"?

Heavens Eagle · « **Reply #8 on:** August 16, 2006, 01:45:18 am »

Here are some photos:

I have been collecting reference material off the net for quite a while now. Many sources and don't know where I found these, but they are not my work. As you can see there is a tinted ring on the top of the primary hull. I have seen it referred to as the "rust ring". Even the original at the Smithsonian shows it though the last refurb overdid the weathering and colors quite a bit. The third pic though is a composite that someone did up using 3 ( or was it 4 ) frames from the original series. This shows the ring as well as the 2 CGI ships.

Don Karnage · « **Reply #9 on:** August 16, 2006, 04:52:37 am »

well the texture where made by Arta, i just copy them.

nice shot of the enterprise

Greenvalv · « **Reply #10 on:** August 16, 2006, 10:06:21 am »

Sfc3files is ready and waiting for these babies.... you can use yousendit.com to upload it there and it sends a link to the receiver...

Wicked Zombie · « **Reply #11 on:** August 16, 2006, 05:18:21 pm »

As far as the ones using my parts are concerned, it's fine by me if you want to post them as long as the proper credits are included.

As for Atra, you'd have better luck flagging him down on his forums:

http://atrahasis.proboards25.com/

Don Karnage · « **Reply #12 on:** August 16, 2006, 09:47:13 pm »

Quote from: Greenvalv on August 16, 2006, 10:06:21 am

Sfc3files is ready and waiting for these babies.... you can use yousendit.com to upload it there and it sends a link to the receiver...

tell me how and i will send them to you.

Don Karnage · « **Reply #13 on:** August 16, 2006, 09:50:47 pm »

Quote from: Wicked Zombie on August 16, 2006, 05:18:21 pm

As far as the ones using my parts are concerned, it's fine by me if you want to post them as long as the proper credits are included.

As for Atra, you'd have better luck flagging him down on his forums:

http://atrahasis.proboards25.com/

thanks for the info wz, also i got 2 of your old model, the bellicose and the ivanove, i know that you remade the bellicose but i still have to old one, so m asking you if its ok if i place them at batteclinic and or at sfc3files?

Greenvalv · « **Reply #14 on:** August 16, 2006, 11:53:01 pm »

Here are some instructions..... http://starfleetcommand3.filefront.com/info/SubmitFiles

If your email doesn't send files, put everything in one archive (Readme's; files; etc.), and then send it off via yousendit.com....

News: