Topic: SFC3 Linksys Router (Read 5330 times)

SkyFlyer · « **on:** November 15, 2005, 11:14:46 pm »

Anyone get this to work? I've tried port forwarding, turning off the firewall, etc.

Bonk · « **Reply #1 on:** November 16, 2005, 06:25:31 am »

Yup, I got it to work on a BEFSR41 in the past. Port forward 2302,2303 and 6073, allow pings and add the IPAddress= line under [meta] in the sfc.ini.

SkyFlyer · « **Reply #2 on:** November 16, 2005, 10:54:27 am »

Quote from: Bonk on November 16, 2005, 06:25:31 am

Yup, I got it to work on a BEFSR41 in the past. Port forward 2302,2303 and 6073, allow pings and add the IPAddress= line under [meta] in the sfc.ini.

how do I allow pings?

SkyFlyer · « **Reply #3 on:** November 16, 2005, 11:01:54 am »

Quote from: Bonk on November 16, 2005, 06:25:31 am

Yup, I got it to work on a BEFSR41 in the past. Port forward 2302,2303 and 6073, allow pings and add the IPAddress= line under [meta] in the sfc.ini.

i'm also in the DMZ.

Bonk · « **Reply #4 on:** November 16, 2005, 11:11:56 am »

Do not use the DMZ and port forwarding. One or the other. Both require a static lan config to work reliably.

Allow pings: http://192.168.1.1/Filters.htm - disable "Block WAN Request"

RTFM!!!

SkyFlyer · « **Reply #5 on:** November 16, 2005, 11:16:36 am »

Block Anonymous Internet Requests

   Filter Multicast

   Filter Internet NAT Redirection

   Filter IDENT(Port 113)

check or uncheck those?

Firewall Protection: Enable, or disable?

Bonk · « **Reply #6 on:** November 16, 2005, 02:09:57 pm »

Block Anonymous Internet Requests Disable

   Filter Multicast Disable

   Filter Internet NAT Redirection Disable

   Filter IDENT(Port 113) Disable

Firewall Protection: Enable, or disable? Disable

SkyFlyer · « **Reply #7 on:** November 16, 2005, 03:38:50 pm »

I got it working... Filter Internet NAT Redirection needed to be enabled.

SkyFlyer · « **Reply #8 on:** November 16, 2005, 03:43:34 pm »

Everything enabled, including firewall worked for me (granted i'm in the DMZ).

Bonk · « **Reply #9 on:** November 16, 2005, 05:37:46 pm »

Glad you got it working!

SkyFlyer · « **Reply #10 on:** November 16, 2005, 09:17:25 pm »

yeah.

News: