Topic: P81's FDN  (Read 3207 times)

0 Members and 5 Guests are viewing this topic.

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
P81's FDN
« on: July 24, 2005, 11:58:43 am »
Hi guys. Some time ago, P81 (I think) made a really good Federation class DN. In the "Ships of the Starfleet" manauls, there is a command cruiser called the U.S.S Balson. As you can see, the 2 look alike, except for the 3rd warp nacelle. I have tried my best to remove that 3rd nacelle, using MfcSfcEd.exe, but to no avail. It works on removing sections on some ships, but not all. I can remove the nacelle, but it you zoom away from the ship, it reappears, if that makes any sensce. Would someone be willing to remove that 3rd nacelle for me, and then maybe post the finished product for everyone to use? i'm happy to send a zip file of the DN.

Offline S33K100

  • Lt. Junior Grade
  • *
  • Posts: 382
  • Gender: Male
  • Brutal, savage, uncivilised, treacherous.
Re: P81's FDN
« Reply #1 on: July 24, 2005, 12:25:41 pm »
Open the file and press the ']' key, the first time it will change to the LOD2 mesh, remove the third nacelle from that mesh, then press the ']' key again and it will sho the LOD3 mesh; again, delete the third nacelle, now save the mesh and look at the model in MODViewer, you will notice when you change to the 2nd and 3rd LODs that the third nacelle is now gone, that should solve your problem. Save often while doing the work though as M6 tends to crash occasionally when working with the lower detail LODs.
If I determine the enemy's disposition of forces while I have no perceptible form, I can concentrate my forces while the enemy is fragmented. The pinnacle of military deployment approaches the formless: if it is formless, then the deepest spy cannot discern it, nor the wise make plans against it.

Sun Tzu 'The Art of War'.

S33K100: formerly Marauth

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: P81's FDN
« Reply #2 on: July 24, 2005, 12:52:52 pm »
Open the file and press the ']' key, the first time it will change to the LOD2 mesh, remove the third nacelle from that mesh, then press the ']' key again and it will sho the LOD3 mesh; again, delete the third nacelle, now save the mesh and look at the model in MODViewer, you will notice when you change to the 2nd and 3rd LODs that the third nacelle is now gone, that should solve your problem. Save often while doing the work though as M6 tends to crash occasionally when working with the lower detail LODs.
Excellent; I'll give it a try.

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: P81's FDN
« Reply #3 on: July 24, 2005, 01:37:39 pm »
Open the file and press the ']' key, the first time it will change to the LOD2 mesh, remove the third nacelle from that mesh, then press the ']' key again and it will sho the LOD3 mesh; again, delete the third nacelle, now save the mesh and look at the model in MODViewer, you will notice when you change to the 2nd and 3rd LODs that the third nacelle is now gone, that should solve your problem. Save often while doing the work though as M6 tends to crash occasionally when working with the lower detail LODs.
Hey, that worked like a charm! Thank you!

Offline S33K100

  • Lt. Junior Grade
  • *
  • Posts: 382
  • Gender: Male
  • Brutal, savage, uncivilised, treacherous.
Re: P81's FDN
« Reply #4 on: July 24, 2005, 05:57:21 pm »
Glad to be of assistance dude, I've been using M6 for so long I think I've stretched it about as far as it can go, you can accomplish quite a lot with that program, I just wish the guy who made it were still developing it, things like the ability to add new textures to a mesh or finer movement of parts would really improve it a lot. As it is it's nice not to have to worry about converting from other files when you only want to make a kitbash.
If I determine the enemy's disposition of forces while I have no perceptible form, I can concentrate my forces while the enemy is fragmented. The pinnacle of military deployment approaches the formless: if it is formless, then the deepest spy cannot discern it, nor the wise make plans against it.

Sun Tzu 'The Art of War'.

S33K100: formerly Marauth

Offline ModelsPlease

  • Retired Model Junkie
  • Commander
  • *
  • Posts: 4665
  • Gender: Male
  • ModelsPlease
Re: P81's FDN
« Reply #5 on: July 27, 2005, 10:15:06 pm »
Open the file and press the ']' key, the first time it will change to the LOD2 mesh, remove the third nacelle from that mesh, then press the ']' key again and it will sho the LOD3 mesh; again, delete the third nacelle, now save the mesh and look at the model in MODViewer, you will notice when you change to the 2nd and 3rd LODs that the third nacelle is now gone, that should solve your problem. Save often while doing the work though as M6 tends to crash occasionally when working with the lower detail LODs.
Hey, that worked like a charm! Thank you!

Well if it worked, why not post your ship please so we can all enjoy it Chrystoff ?
-MP

ModelsPlease, resident "Model Junkie" recovering from a tragic crayon sharpener accident.

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: P81's FDN
« Reply #6 on: July 29, 2005, 03:24:11 pm »
Open the file and press the ']' key, the first time it will change to the LOD2 mesh, remove the third nacelle from that mesh, then press the ']' key again and it will sho the LOD3 mesh; again, delete the third nacelle, now save the mesh and look at the model in MODViewer, you will notice when you change to the 2nd and 3rd LODs that the third nacelle is now gone, that should solve your problem. Save often while doing the work though as M6 tends to crash occasionally when working with the lower detail LODs.
Hey, that worked like a charm! Thank you!

Well if it worked, why not post your ship please so we can all enjoy it Chrystoff ?
-MP
Absolutely!! Where (and how) do i do it? I did a few different ships, and I'd like to share them.

Offline ModelsPlease

  • Retired Model Junkie
  • Commander
  • *
  • Posts: 4665
  • Gender: Male
  • ModelsPlease
Re: P81's FDN
« Reply #7 on: July 29, 2005, 06:03:19 pm »
Open the file and press the ']' key, the first time it will change to the LOD2 mesh, remove the third nacelle from that mesh, then press the ']' key again and it will sho the LOD3 mesh; again, delete the third nacelle, now save the mesh and look at the model in MODViewer, you will notice when you change to the 2nd and 3rd LODs that the third nacelle is now gone, that should solve your problem. Save often while doing the work though as M6 tends to crash occasionally when working with the lower detail LODs.
Hey, that worked like a charm! Thank you!


Well if it worked, why not post your ship please so we can all enjoy it Chrystoff ?
-MP
Absolutely!! Where (and how) do i do it? I did a few different ships, and I'd like to share them.


Go to Battleclinic, sign up for free. Then go to the Community Yards http://www.battleclinic.com/docks/dock.php. Then click on upload. The directions are really simple to follow, and if ya get into any trouble just PM or IM Mr.Cue.

That should do it.

ModelsPlease, resident "Model Junkie" recovering from a tragic crayon sharpener accident.

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: P81's FDN
« Reply #8 on: July 29, 2005, 11:13:16 pm »
Go to Battleclinic, sign up for free. Then go to the Community Yards http://www.battleclinic.com/docks/dock.php. Then click on upload. The directions are really simple to follow, and if ya get into any trouble just PM or IM Mr.Cue.

That should do it.
Quote
Okay. I guess I'd better make sure the readme's are all correct. I'll post something when I'm ready to go. About time I contributed something, eh? ;D

Offline Bernard Guignard

  • Cad Schematics are our Speciality
  • Lt.
  • *
  • Posts: 888
  • Gender: Male
  • Trek Canon!!! I NO believe in TreK Canon!!!.
Re: P81's FDN
« Reply #9 on: July 30, 2005, 07:43:56 am »
Good Man I'm looking forward to this ship it will make a great command Cruiser in the game ;D

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: P81's FDN
« Reply #10 on: July 30, 2005, 12:57:43 pm »
Good Man I'm looking forward to this ship it will make a great command Cruiser in the game ;D
Actually, I have 6 ships to upload. I'm just waiting for Battleclinic to verify my email address.

Offline ModelsPlease

  • Retired Model Junkie
  • Commander
  • *
  • Posts: 4665
  • Gender: Male
  • ModelsPlease
Re: P81's FDN
« Reply #11 on: July 30, 2005, 01:32:46 pm »
Good Man I'm looking forward to this ship it will make a great command Cruiser in the game ;D
Actually, I have 6 ships to upload. I'm just waiting for Battleclinic to verify my email address.

WOOHOO six new ships  ;D
-MP

ModelsPlease, resident "Model Junkie" recovering from a tragic crayon sharpener accident.

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: P81's FDN
« Reply #12 on: July 30, 2005, 02:12:46 pm »
WOOHOO six new ships  ;D
-MP
Quote
Hey, MP, how long does it take for Battleclinic to verify your email address? It's been a few hours now...

Offline ModelsPlease

  • Retired Model Junkie
  • Commander
  • *
  • Posts: 4665
  • Gender: Male
  • ModelsPlease
Re: P81's FDN
« Reply #13 on: August 01, 2005, 10:33:53 am »
It should have been instantaneous, MrCue is online, PM or IM him now and see if he can help ya
-MP

ModelsPlease, resident "Model Junkie" recovering from a tragic crayon sharpener accident.

Offline Chrystoff

  • Lt.
  • *
  • Posts: 522
  • Gender: Male
Re: P81's FDN
« Reply #14 on: August 01, 2005, 08:23:41 pm »
It should have been instantaneous, MrCue is online, PM or IM him now and see if he can help ya
-MP
Okay, I'll check with him.