Topic: SFC-Orion Pirates Default Power Priorities  (Read 12298 times)

0 Members and 1 Guest are viewing this topic.

Offline Corbomite

  • Commander
  • *
  • Posts: 2939
SFC-Orion Pirates Default Power Priorities
« on: June 05, 2005, 01:47:00 pm »
[This Topic is Under Reconstruction]


« Last Edit: May 19, 2011, 04:14:47 pm by Corbomite »

Offline Nemesis

  • Captain Kayn
  • Global Moderator
  • Commodore
  • *
  • Posts: 13062
Re: SFC-Orion Pirates Default Power Priorities
« Reply #1 on: December 11, 2005, 04:36:10 pm »
3) Shields (Unchangeable unless you go to Green Alert. The entire shield grid can be turned off for more power. turning off individual shields has no effect on power)

When setting your power priorities you can set a default shield reinforcement with Shift+Scroll Lock.  However the shields must be at the maximum targeted reinforcement before using the Shift+Scroll Lock. 

The best (IMO) way is to set your priorities with maximum possible shield reinforcement and zero speed.  Setting an approximate speed after red alert is easy with one mouse click so speed is less important to preset than reinforcement.
Do unto others as Frey has done unto you.
Seti Team    Free Software
I believe truth and principle do matter. If you have to sacrifice them to get the results you want, then the results aren't worth it.
 FoaS_XC : "Take great pains to distinguish a criticism vs. an attack. A person reading a post should never be able to confuse the two."

Offline Corbomite

  • Commander
  • *
  • Posts: 2939
Re: SFC-Orion Pirates Default Power Priorities
« Reply #2 on: February 19, 2007, 09:49:21 pm »
3) Shields (Unchangeable unless you go to Green Alert. The entire shield grid can be turned off for more power. turning off individual shields has no effect on power)

When setting your power priorities you can set a default shield reinforcement with Shift+Scroll Lock.  However the shields must be at the maximum targeted reinforcement before using the Shift+Scroll Lock. 

The best (IMO) way is to set your priorities with maximum possible shield reinforcement and zero speed.  Setting an approximate speed after red alert is easy with one mouse click so speed is less important to preset than reinforcement.



I agree with your tactical assesment, however setting reinforcement with Shift+Scroll Lock will not raise it's "priority" as far as energy allocation, only put it at a preset level, assuming the energy is available.

Offline Corbomite

  • Commander
  • *
  • Posts: 2939
Re: SFC-Orion Pirates Default Power Priorities
« Reply #3 on: April 03, 2008, 10:02:40 am »
Some corrections put in:

1) Fire Control Scanners never go off, even at Green Alert.

2) Shield power updated with correct info (I found a better test).