Topic: Gafy excelcior blanks (Read 3682 times)

Starforce2 · « **on:** April 14, 2005, 09:59:14 pm »

does anyone have the blanks for the excelcior and and excel-b (and B cargo) variants? I've searched my hd, can't find them anywhere so I may have deleted or hidden them away somewhere. If anyone has a copy, let me know.

Rogue NineCH · « **Reply #1 on:** April 14, 2005, 10:47:12 pm »

I have some, although they are a lighter blue than what he used on the excelsior fleet.

Starforce2 · « **Reply #2 on:** April 15, 2005, 12:08:27 am »

I'd want matching textures.

Rogue NineCH · « **Reply #3 on:** April 15, 2005, 01:34:25 am »

Quote from: Starforce2 on April 15, 2005, 12:08:27 am

I'd want matching textures.

Since the textures are exactly the same, you could just cover up the numbers and names by taking a lassoed portion form the blanks and mathcing them up to the texture that you want to use. Very easily done.

GotAFarmYet? · « **Reply #4 on:** April 15, 2005, 01:56:38 am »

I only have them in the normal blue that the Excelsior comes in. The FOAS fleet I never really made them for, I just use the orginal blanks I have and cut and paste the registries to the new ship I am doing then don't save the orginals as I close them. I could make them for you as it takes just a few minutes to do. Only bad part is i will not have time until Saturday to do them.

ModelsPlease · « **Reply #5 on:** April 15, 2005, 03:45:02 am »

I believe you can find them on page 3 of the retextures on Mackies site

Starforce2 · « **Reply #6 on:** April 15, 2005, 05:12:48 am »

I thought those were just "wedges" cut out for the names, not whole saucers?

Rogue NineCH · « **Reply #7 on:** April 15, 2005, 06:32:31 pm »

Quote from: Starforce2 on April 15, 2005, 05:12:48 am

I thought those were just "wedges" cut out for the names, not whole saucers?

Yes those are wedges of names. I'll zip up the blanks I have, and post the link where you can get them later tonight. If you want them they'll be there.

Starforce2 · « **Reply #8 on:** April 15, 2005, 08:20:34 pm »

Quote from: GotAFarmYet? on April 15, 2005, 01:56:38 am

I only have them in the normal blue that the Excelsior comes in. The FOAS fleet I never really made them for, I just use the orginal blanks I have and cut and paste the registries to the new ship I am doing then don't save the orginals as I close them. I could make them for you as it takes just a few minutes to do. Only bad part is i will not have time until Saturday to do them.

you mean make blanks for the FOAS fleet? hat'd be great. I can't wait till saturday np.

Infact I need both as a few are not FOAS bashes.

Rogue NineCH · « **Reply #9 on:** April 15, 2005, 10:51:42 pm »

Ok here is the file it includes both types as blanks.

http://www.rogueshipyards.com/Exc-Blanks.rar

Starforce2 · « **Reply #10 on:** April 16, 2005, 01:36:42 am »

Thanks dude. Also, what about the ent-B variant...doesn't that have a different saucer? I'd just need FOAS for that one I believe. I don't think I need a blank-B for any mackie bashes.

Rogue NineCH · « **Reply #11 on:** April 16, 2005, 02:25:30 am »

Quote from: Starforce2 on April 16, 2005, 01:36:42 am

Thanks dude. Also, what about the ent-B variant...doesn't that have a different saucer? I'd just need FOAS for that one I believe. I don't think I need a blank-B for any mackie bashes.

The saucer is modeled different, but the textures are the same. Unless GAFY has a model of the Enterprise B that I haven't seen, but the one I have is the same texture. Let me know if it fits.

GotAFarmYet? · « **Reply #12 on:** April 16, 2005, 02:33:21 am »

The bottom texture for the B variant is slightly different. The B one uses the same texture with a few previously unused areas mapped for the saucer warp engines/secondary impulse engines.

Starforce2 · « **Reply #13 on:** April 16, 2005, 06:27:17 am »

I thought the top was different too?

GotAFarmYet? · « **Reply #14 on:** April 16, 2005, 01:20:08 pm »

Nope the top texture is the same one, there is no difference between the Excel and Excel B.

Rogue NineCH · « **Reply #15 on:** April 16, 2005, 02:47:36 pm »

Quote from: GotAFarmYet? on April 16, 2005, 02:33:21 am

The bottom texture for the B variant is slightly different. The B one uses the same texture with a few previously unused areas mapped for the saucer warp engines/secondary impulse engines.

Ok, I found the bottom texture you were talking about, and updated the zip file. The link is the same, but it might take a few hours for the update to take effect. Maybe try it in two or three hours and makes sure the file size is over 5MB. Anything less and it's still the old file.

darkthunder · « **Reply #16 on:** April 16, 2005, 07:03:39 pm »

Saucer warp engines? On an Excelsior?

GotAFarmYet? · « **Reply #17 on:** April 17, 2005, 12:29:51 am »

This is the one they are talking about

Starforce2 · « **Reply #18 on:** April 17, 2005, 01:56:56 am »

Quote from: Rogue NineCH on April 16, 2005, 02:47:36 pm

Quote from: GotAFarmYet? on April 16, 2005, 02:33:21 am
The bottom texture for the B variant is slightly different. The B one uses the same texture with a few previously unused areas mapped for the saucer warp engines/secondary impulse engines.

Ok, I found the bottom texture you were talking about, and updated the zip file. The link is the same, but it might take a few hours for the update to take effect. Maybe try it in two or three hours and makes sure the file size is over 5MB. Anything less and it's still the old file.

It's still comming up as 4.89 megs and it's been over 3-4 hrs. Is anyone else getting a different file size?

Rogue NineCH · « **Reply #19 on:** April 17, 2005, 04:23:59 am »

Ok I fixed it now. The file size is still 4.89, but it has the new texture in it.

News:

Topic: Gafy excelcior blanks (Read 3682 times) var addthis_config = {"data_track_clickback":true};

Topic: Gafy excelcior blanks (Read 3682 times)