Topic: Vigilant Class - updated pic 13/11/04 (Read 15296 times)

markyd · « **on:** October 30, 2004, 09:50:53 am »

Vigilant Class Original Design (Buzz) Reworked by (Az)

Im still at a loss as to what needs to go here ???

The middle one I have worked out... but what would you stick on the left and right sides in here.. shuttle bays? Impulse engines?

Sochin · « **Reply #1 on:** October 30, 2004, 10:01:13 am »

Middle aft structure is impulse engines the other two either not sure. Its looks as though the central section needs stretching or rescaling , not by much it just looks a little on the small size compared to the warp nacelles.

But whatever happens it still looks good, a damn mean looking ship.

Sochin · « **Reply #2 on:** October 30, 2004, 10:03:52 am »

Strike my last, centre is fuselage outer sections are impulse engines by the looks of Atolm's schematic.

http://img15.exs.cx/img15/6066/FederationVigilant-Class01.jpg

ModelsPlease · « **Reply #3 on:** October 30, 2004, 10:04:07 am »

IMHO I believe it should be impulse engines.If you think about the defiant,she had one small shuttle.Being a DD she doesn't really have room for traditional shuttlebays.But that's just my $.02.Great work markyd sir!

-MP

markyd · « **Reply #4 on:** October 30, 2004, 10:08:36 am »

Ok thanks guys...

markyd · « **Reply #5 on:** October 30, 2004, 11:17:03 am »

3200 Poly's

Anything you guys would change or add or whatever before I begin working on textures?

Azel · « **Reply #6 on:** October 30, 2004, 12:01:17 pm »

Great stuff so far mate!!!
Ok the ship itself is too snub...gotta pull her length out some...the deflectors are good but the aft part of the deflector housing needs to be blended into the rest of the
hull....the foward pod has a deflector assembly aswell.....Inquiry though...what is that spine looking thing on the belly???

markyd · « **Reply #7 on:** October 30, 2004, 12:46:38 pm »

Quote from: Azel on October 30, 2004, 12:01:17 pm

Great stuff so far mate!!!
Ok the ship itself is too snub...gotta pull her length out some...the deflectors are good but the aft part of the deflector housing needs to be blended into the rest of the
hull....the foward pod has a deflector assembly aswell.....Inquiry though...what is that spine looking thing on the belly???

Spine because it looked a little bland on the bottom and I thought the spine would tough her up a bit... (easily removed) Could you point out the forward deflector to me? and I will blend in the rear of the deflector pods.. although I thought they looked good that way...

I'll do the changes now!

Thanks AZ

E_Look · « **Reply #8 on:** October 30, 2004, 01:26:21 pm »

The basic design is very interesting... as well as looking good.

markyd · « **Reply #9 on:** October 30, 2004, 01:29:58 pm »

Thank Az & Buzz for the design... Im just making the model

Azel · « **Reply #10 on:** October 30, 2004, 02:02:30 pm »

On the deflector... look at the front veiw in the main thread:
http://www.dynaverse.net/forum/index.php/topic,163347600.0.html

markyd · « **Reply #11 on:** October 30, 2004, 02:10:43 pm »

You mean inside the nose??? Ok.. I have made the other amendments you suggested... I will add the deflector in the nose then add the textures unless their is anything else.... say now people of forever hold your peace

Azel · « **Reply #12 on:** October 30, 2004, 02:56:46 pm »

Quote from: MarkyD on October 30, 2004, 02:10:43 pm

You mean inside the nose??? Ok.. I have made the other amendments you suggested... I will add the deflector in the nose then add the textures unless their is anything else.... say now people of forever hold your peace

well show me the wip...and we'll confer lol

markyd · « **Reply #13 on:** October 30, 2004, 03:28:28 pm »

Azel · « **Reply #14 on:** October 30, 2004, 03:33:20 pm »

That looks good

Sochin · « **Reply #15 on:** October 30, 2004, 03:51:31 pm »

Marky that is the dogs sphericals have some Karma.

markyd · « **Reply #16 on:** October 30, 2004, 04:13:47 pm »

Quote from: F9thSochin on October 30, 2004, 03:51:31 pm

Marky that is the dogs sphericals have some Karma.

rofl... thanks guys.. I will start the textures then

OlBuzzard · « **Reply #17 on:** October 30, 2004, 05:19:42 pm »

sorry to have been afk all afternoon.. I'm locating something for the back end for ya.. and the taper for the deflector areas !!

everything else looks great !

markyd · « **Reply #18 on:** October 30, 2004, 06:31:39 pm »

Dont dwell on it buzz buddy... give me the refinements so I can texture this little ship of yours... I'm itching!!!

Sandman3D · « **Reply #19 on:** October 30, 2004, 08:35:05 pm »

AWESOME!!

OlBuzzard · « **Reply #20 on:** October 30, 2004, 10:06:19 pm »

Hey bud .. again I apologise for the inability get this to you in a timely fashion. I deeply appreciate your efforts and willingness to review this data.

Azel .. please review and see if I have missed something ( I know I'm still a little green )

I hope this helps .. BTW.. I agree with Azels previous assessments with one word of advice ... dot stretch too far .. it might look more like a Romulan design !!

At any rate .. hope this helps...

thanks again

markyd · « **Reply #21 on:** October 31, 2004, 02:57:52 am »

Quote from: Sandman3D on October 30, 2004, 08:35:05 pm

AWESOME!!

Thanks man

Quote from: F9thOlbuzzard on October 30, 2004, 10:06:19 pm

Hey bud .. again I apologise for the inability get this to you in a timely fashion. I deeply appreciate your efforts and willingness to review this data.

Azel .. please review and see if I have missed something ( I know I'm still a little green )

I hope this helps .. BTW.. I agree with Azels previous assessments with one word of advice ... dot stretch too far .. it might look more like a Romulan design !!

At any rate .. hope this helps...

thanks again

And thanks for going to detail here Buzz.... the sensor pod thingies already taper to the back now though az brought that up if you look in the second set of piccies you can see I changed that, photon tubes easily added will do it when I get back from work 2nite and as for the rear... should I just flatten the V out as I have the docking port already in there.. flatten out and stick on the tubes then it should be good to start the textures right

OlBuzzard · « **Reply #22 on:** October 31, 2004, 07:46:15 am »

I think perhaps making it a lot "thinner" was a big pat of it. If ya choose to install a docking port (assuming that there is adequate space .. that's ok ... excellent idea . ) but don't make to the aft section too thick in order to accommodate it ...

Oh .. and yes there are 4 impulse engine thruster outlets ..2 top .. 2 bottom..

I hope this makes sense !!

again .. thanks so much for the efforts !

markyd · « **Reply #23 on:** October 31, 2004, 12:58:59 pm »

Ok all done texturing has begun.......

I will show a pic so you see the colour scheme i was thinking gis a sec

markyd · « **Reply #24 on:** October 31, 2004, 01:01:18 pm »

what do you think... I was thinking these go well together?

Anything you guys would change... darker? lighter? completely different colours? ???

OlBuzzard · « **Reply #25 on:** October 31, 2004, 01:28:06 pm »

I personally would like to see what late TNG ... darker grays

just a thought ...

BTW... did ya post any updated picts of the final mesh .. ya kinda got me in suspence here bud !!

markyd · « **Reply #26 on:** October 31, 2004, 01:41:15 pm »

Darker Gray.... In sections of hull.... or the overall gray needs to be darker?

OlBuzzard · « **Reply #27 on:** October 31, 2004, 01:46:02 pm »

Hmmm if ya recall RD's version of the Sovy .. that sort of gray ( less blue tint I guess iw what I'm trying to say ) and yes .. where ever you think best .. darker gray textures ..

(some how I don't think I'm doing a good job at explaining what I'm trying to say) .. I know you will do a good job !! Heck you've done a superb job with the mesh !

FoaS_XC · « **Reply #28 on:** October 31, 2004, 01:48:59 pm »

Looks fantastic!

as for colors, can i request a second set of textures that uses dark red in place of the tan?

markyd · « **Reply #29 on:** October 31, 2004, 01:55:10 pm »

Quote from: F9thOlbuzzard on October 31, 2004, 01:46:02 pm

Hmmm if ya recall RD's version of the Sovy .. that sort of gray ( less blue tint I guess iw what I'm trying to say ) and yes .. where ever you think best .. darker gray textures ..

(some how I don't think I'm doing a good job at explaining what I'm trying to say) .. I know you will do a good job !! Heck you've done a superb job with the mesh !

I think I know what you mean...

Quote from: Furyofaseraph on October 31, 2004, 01:48:59 pm

Looks fantastic!

as for colors, can i request a second set of textures that uses dark red in place of the tan?

Great minds think allike... I was thinking of doing a second set of textures with red instead of tan... make it look mean

wulf111 · « **Reply #30 on:** November 01, 2004, 08:23:46 am »

looking awsome

wulf111 · « **Reply #31 on:** November 01, 2004, 11:47:35 am »

i like the way you started the texture you should keep them and make it another alternate texture

OlBuzzard · « **Reply #32 on:** November 01, 2004, 12:28:04 pm »

looking good !!!

markyd · « **Reply #33 on:** November 01, 2004, 12:35:42 pm »

Ok Cool.... I will work on this set.... then I will make variations... i.e the sovvy theme and red theme as variations.. I will also make different reg's for each theme... one U.S.S. Wulf, U.S.S. Buzzard and U.S.S. Azel

Azel · « **Reply #34 on:** November 01, 2004, 02:24:16 pm »

Quote from: MarkyD on November 01, 2004, 12:35:42 pm

Ok Cool.... I will work on this set.... then I will make variations... i.e the sovvy theme and red theme as variations.. I will also make different reg's for each theme... one U.S.S. Wulf, U.S.S. Buzzard and U.S.S. Azel

sorry mate I already have a ship named after me...but thanks

Rat Boy · « **Reply #35 on:** November 01, 2004, 02:57:51 pm »

Hey Buzz, remember that Defiant-style light cruiser we were discussing many months ago? I think this works as it.

Sochin · « **Reply #36 on:** November 03, 2004, 03:15:25 am »

Bump for front page

markyd · « **Reply #37 on:** November 03, 2004, 07:01:05 am »

The head is now fully done... I started on the wings yesterday but work has been a bit hectic... I'll get stuck into them a bit more tonight and then post some WIP

Sochin · « **Reply #38 on:** November 05, 2004, 04:08:28 pm »

Bump, why because I can.

Sochin · « **Reply #39 on:** November 07, 2004, 01:13:28 pm »

Bump why, why the hell not.

markyd · « **Reply #40 on:** November 07, 2004, 01:54:59 pm »

not mutch to show.... again Im stuck in work at the moment and it is a mad house... hopefully im free all weekend and i'll try to catch up with some bits if i get time in the week

OlBuzzard · « **Reply #41 on:** November 07, 2004, 04:37:51 pm »

NP .... if anyone understands that it's me !! ( I average about 55 to 62 hours every week) ...

Take your time and do it right !!

I appreciate your work bud !!

thanks

Lord Schtupp · « **Reply #42 on:** November 07, 2004, 10:05:12 pm »

Hiya - Im really liking the front half in your last post there markyd

markyd · « **Reply #43 on:** November 08, 2004, 10:18:33 am »

Thanks LS....

I have a couple of hours tonight so im gonna get the wings done... post progress later

markyd · « **Reply #44 on:** November 08, 2004, 03:33:55 pm »

wings coming along nicely....

More tommorow

Sochin · « **Reply #45 on:** November 08, 2004, 03:42:42 pm »

Your doing a good job keep up the good work.

markyd · « **Reply #46 on:** November 08, 2004, 03:49:26 pm »

I intend too..... need to work on them some more.... any changes you guys would make or add.... not sure what im gonna do about portholes yet... although i do plan on sticking the red stripes and fed logo on the wings

Core · « **Reply #47 on:** November 08, 2004, 03:50:32 pm »

drool

markyd · « **Reply #48 on:** November 08, 2004, 03:56:48 pm »

rofl thanks core

Azel · « **Reply #49 on:** November 08, 2004, 04:33:01 pm »

Looking good mate

markyd · « **Reply #50 on:** November 08, 2004, 06:16:16 pm »

Thanks AZ.... Your detailed drawings makes my job of texturing mutch easier

ModelsPlease · « **Reply #51 on:** November 09, 2004, 05:11:59 am »

WOWZERS great work man. You gotta start getting your ships to me or F_W so we can upload em.
-MP

wulf111 · « **Reply #52 on:** November 09, 2004, 08:09:35 am »

Totally awsome

:notworthy:keep it up

markyd · « **Reply #53 on:** November 10, 2004, 04:24:16 pm »

Wings pretty mutch done except for the logo and stripes...

Do they look a little dull? ???

Azel · « **Reply #54 on:** November 10, 2004, 04:49:43 pm »

OOOOO yeah that's the stuff!!!

OlBuzzard · « **Reply #55 on:** November 10, 2004, 06:35:37 pm »

I think my poor little puter strained something getting this to DL .. but it was definately worth it !!

I appreciate the efforts !!

Looks great !

Sochin · « **Reply #56 on:** November 11, 2004, 03:40:02 am »

Refrence the looking a little dull, when the rest of the vigilant is textured it will look correct. The panels I think look right for her, and it will brighten up when you add light maps, keep up the good work.

wulf111 · « **Reply #57 on:** November 11, 2004, 07:12:58 am »

looking great so far Markyd awsome!!

Sandman3D · « **Reply #58 on:** November 12, 2004, 12:08:10 pm »

Looks freakin' awesome!!

MrCue · « **Reply #59 on:** November 12, 2004, 12:09:54 pm »

im looking forwards to seeing this beautiful ship.

wulf111 · « **Reply #60 on:** November 12, 2004, 12:17:57 pm »

any chance we can get an update im iching to see what you are doing with the main hull section

markyd · « **Reply #61 on:** November 12, 2004, 01:42:48 pm »

Just touching up the wings and ilumination maps... working on the underside of the hull whilst im typing this

wulf111 · « **Reply #62 on:** November 12, 2004, 01:45:23 pm »

DANM thats looking EXELLENT!!!!!!!

i do have a suggestion for the USS-WULF do the texture of the nose piece like a wolf's head just an idea

markyd · « **Reply #63 on:** November 12, 2004, 01:48:02 pm »

Thanks Wulf..... you guys reckon the blue section of the necelle warpy thingys (my trek tech is terrible im sure you know what I mean

) is ok on the inside like it is....

my excuse is that they are protected their or somthing ???

he he

wulf111 · « **Reply #64 on:** November 12, 2004, 01:50:40 pm »

it looks ok but i thought that the extruded parts of the wing where the warp grills

markyd · « **Reply #65 on:** November 12, 2004, 01:54:06 pm »

Nah... on both Buzz and Az's drawings they were grey extruded hull bitty things... I suppose I could make them blue and cage them up or somthing ???

If I get enough requests and buzz and azz give the thumbs up I have no probs in changing it..

OlBuzzard · « **Reply #66 on:** November 12, 2004, 02:24:55 pm »

Actually the "glows" were on the top and bottom of the nacelles .. Azel came up with the idea of it being on the bottom only and the nacelles swiveling into a protected position during a combat situation .. ( one which I approved ) ..

The extruded area on the outside trailing edge of the nacelles .. hmmm let me see if I can explain it ..

ya know the nacelle caps off of the TOS Enterprise ... well that is kinda what those are ... long and narrow and yes wrapping around the corner the way the are .. ( I hope you guys don't dissaprove of that too much .... but that was what I had in mind any ways)

Please note : ..... bad habit of Ol Buzzard ..... little nostalgia in just about everything I do .... some where !! ( sorry ... old habits die hard !)

wulf111 · « **Reply #67 on:** November 12, 2004, 02:29:34 pm »

oh OK i got ya now. that does clear that up for me

markyd · « **Reply #68 on:** November 12, 2004, 03:43:09 pm »

Im gonna leave the necceles the way they are... I need to get this finished so I can get stuck into other projects

Top progress.... what does it need... looks like its missing somthing.... port holes? ???

OlBuzzard · « **Reply #69 on:** November 12, 2004, 04:23:01 pm »

What you have done so far is really classy bud .. this is very nice..

just one change ... I noticed you called this the USS Buzzard???

OY .. for such a classic piece of work that you have done such a great job on ... rename the ship !! I'll entertain suggestions .. but DEFINITELY NOT "Buz" ... "Buzaard" .. ( ecch !!)

Please continue with you work !! Looks great as I've said all along .. I'm flatter that you considered and have now nearly COMPLETED the job...

thanks

markyd · « **Reply #70 on:** November 12, 2004, 04:34:29 pm »

I quite like Buzzard... think its cool..... ???

But I dont mind a name change.... but remember their will be 3 sets of textures each with a different name... the darker set will also replace the cream shade with a dark red... the blue with a dark gray and the overall ship will be a darker shade.. that will be the u.s.s. wulf

OlBuzzard · « **Reply #71 on:** November 12, 2004, 04:45:43 pm »

(Ol Buzzards face turning red)

I'll leave it up to you, (particularly since you know a heck of lot about this stuff than I do ...)

carry on !!

markyd · « **Reply #72 on:** November 12, 2004, 04:47:27 pm »

Will Do!!!

Bed now though... more tomoz.... should have her finished by the end of the day.

Lord Schtupp · « **Reply #73 on:** November 12, 2004, 05:43:46 pm »

Whoa thats lookin good - nice original design!

Lord Schtupp · « **Reply #74 on:** November 12, 2004, 10:27:24 pm »

Hmm This is only my opinion and I wont get upset (much, well maybe Ill cry a little bit but I'll get over it eventually) if you dont dig it, but I would find a more noble name than Buzzard, thats a carrion-scavenger bird. This model is more worthy I think.

Why not Falcon, its has'nt been used (much), the model looks much more like a perigrin falcon diving on its prey than some dumd ol buzzard circling around some roadkill lol. Peregrin Falcon is also fastest animal on earth, certianly suitable for this big engined machine.

Good against the Romulans.

Just an opinion from lil ol schtupp

ModelsPlease · « **Reply #75 on:** November 13, 2004, 12:13:16 am »

Quote from: Lord Schtupp on November 12, 2004, 10:27:24 pm

Hmm This is only my opinion and I wont get upset (much, well maybe Ill cry a little bit but I'll get over it eventually) if you dont dig it, but I would find a more noble name than Buzzard, thats a carrion-scavenger bird. This model is more worthy I think.

Why not Falcon, its has'nt been used (much), the model looks much more like a perigrin falcon diving on its prey than some dumd ol buzzard circling around some roadkill lol. Peregrin Falcon is also fastest animal on earth, certianly suitable for this big engined machine.

Good against the Romulans.

Just an opinion from lil ol schtupp

Hey Yeah I'll second that one USS Falcon or USS Pereguine far better suiting names. IIRC there's a TMP perguine out there, perhaps this could be it's replacement in the TNG era. This ships definately a predator,not a scavanger.
-MP

OlBuzzard · « **Reply #76 on:** November 13, 2004, 01:20:14 am »

Quote from: ModelsPlease on November 13, 2004, 12:13:16 am

the model looks much more like a perigrin falcon diving on its prey than some dumd ol buzzard circling around some roadkill lol. Peregrin Falcon is also fastest animal on earth, certianly suitable for this big engined machine.

Good against the Romulans.

Just an opinion from lil ol schtupp

far better suiting names. IIRC there's a TMP perguine out there, perhaps this could be it's replacement in the TNG era. This ships definately a predator,not a scavanger.
-MP

Quote

My thoughts exactly ...

Dunno about a bird .... smacks of Romulan designs too much. But I defiantly like the idea of a predator derivative, variant or root.

thanks

markyd · « **Reply #77 on:** November 13, 2004, 03:01:08 am »

Ok you guys give me a name and I'll change it

Sochin · « **Reply #78 on:** November 13, 2004, 05:30:47 am »

What about USS Kestrel. Oh great job so far.

MrCue · « **Reply #79 on:** November 13, 2004, 06:11:29 am »

USS Raptor (as in Velociraptor, means (speedy) Thief)
USS Kakuru (means Rainbow serpent)

markyd · « **Reply #80 on:** November 13, 2004, 06:29:27 am »

Ohhhh I like Raptor

markyd · « **Reply #81 on:** November 13, 2004, 10:17:50 am »

Kaenyne · « **Reply #82 on:** November 13, 2004, 10:55:50 am »

She's lookin' sweeter with every new pic.

Lord Schtupp · « **Reply #83 on:** November 13, 2004, 11:35:33 am »

Yea Raptor is a good name - I guess my hankie can stay in its drawer

Buzzard would be a good name for a pirate ship.

markyd · « **Reply #84 on:** November 13, 2004, 11:40:26 am »

RAPTOR it is then

Sandman3D · « **Reply #85 on:** November 13, 2004, 12:09:04 pm »

How about the whole name... USS VELOCIRAPTOR...there is a pre-TOS ship, with a cool patch...could be an ancestor?

OlBuzzard · « **Reply #86 on:** November 13, 2004, 12:41:02 pm »

Quote from: Sandman3D on November 13, 2004, 12:09:04 pm

How about the whole name... USS VELOCIRAPTOR...there is a pre-TOS ship, with a cool patch...could be an ancestor?

sweet ....

MrCue · « **Reply #87 on:** November 13, 2004, 12:41:44 pm »

Nice badge, but is it possible to move the foot out of the way of the "R" & "T"?

ModelsPlease · « **Reply #88 on:** November 14, 2004, 04:27:18 am »

Yeah Raptor is a cool name. That patch is awesome too. I'm just not keen on the insignia placement on the wings. It just doesn't look right to me.Keep up the outstanding work MarkyD !!!!!
-MP

markyd · « **Reply #89 on:** November 14, 2004, 06:13:02 am »

OlBuzzard · « **Reply #90 on:** November 14, 2004, 07:51:07 am »

hey bud ... one of those little boxes with a red "x" is all that is showing up !!

( heheheh .... what a tease !!)

wulf111 · « **Reply #91 on:** November 15, 2004, 07:32:07 am »

looking fantasic Markyd keep up the great work. I am really looking forward to this release

markyd · « **Reply #92 on:** November 15, 2004, 02:20:46 pm »

finished the model... conveted it to .mod and when I did I got a couple of mesh glitches... shadowy overlaps and the like.... im gonna fix em then post pics when its done... i hate welding vertices.... booooooooooooooooooooooorrrrrrrrrrrrring $:-\$

Is it possible to add vertices to a 3d shape?

Lord Schtupp · « **Reply #93 on:** November 15, 2004, 02:32:22 pm »

Quote from: MarkyD on November 15, 2004, 02:20:46 pm

finished the model... conveted it to .mod and when I did I got a couple of mesh glitches... shadowy overlaps and the like.... im gonna fix em then post pics when its done... i hate welding vertices.... booooooooooooooooooooooorrrrrrrrrrrrring $:-\$

Is it possible to add vertices to a 3d shape?

Yes you might want to try edit mesh>face>divide. where you click on the face will add a vertex.

markyd · « **Reply #94 on:** November 15, 2004, 02:34:27 pm »

Thanks LS.... that will be a timesaver

Lord Schtupp · « **Reply #95 on:** November 15, 2004, 02:44:47 pm »

Coolness

OlBuzzard · « **Reply #96 on:** November 15, 2004, 06:24:32 pm »

Quote from: Lord Schtupp on November 15, 2004, 02:44:47 pm

Coolness

Right on bubba !!

battlestar001 · « **Reply #97 on:** November 16, 2004, 11:50:10 am »

She looks fantastic, where can i d/l her from?

Sochin · « **Reply #98 on:** November 18, 2004, 09:47:42 am »

Bumpy Bumpy

markyd · « **Reply #99 on:** November 18, 2004, 07:22:42 pm »

Currently re-organising my life... collapse of the STGD...... ???

Back on my feet in a couple of days

Sochin · « **Reply #100 on:** November 19, 2004, 03:21:46 am »

Yep heard about that, nice tag by the way, calm sailing sir.

OlBuzzard · « **Reply #101 on:** November 20, 2004, 09:26:30 am »

I've seen what appears to be the finished product ...

most excellent !!

markyd · « **Reply #102 on:** November 20, 2004, 05:29:02 pm »

Sneaky peak eh? rofl.....

Nearly finished.... the rest of you will have to wait he he

OlBuzzard · « **Reply #103 on:** November 21, 2004, 09:03:58 am »

Quote from: S31-MarkyD on November 20, 2004, 05:29:02 pm

Sneaky peak eh? rofl.....

Nearly finished.... the rest of you will have to wait he he

that's cool bud ... You've done a superb job ... everyone will gladly wait for a superior product !!

I know your part of the SFC universe has been shaken a bit. So when you are ready to finish ... that will be cool.

thanks again !

Azel · « **Reply #104 on:** November 24, 2004, 04:13:33 pm »

Bump for news and/or info

markyd · « **Reply #105 on:** November 24, 2004, 08:01:24 pm »

Final touches on the damage map.. then a release

Azel · « **Reply #106 on:** November 24, 2004, 08:57:43 pm »

DookeyKing · « **Reply #107 on:** November 30, 2004, 11:07:17 am »

bumping for realease info...

Scott

markyd · « **Reply #108 on:** November 30, 2004, 12:54:53 pm »

Just got to sort out my lightmap probs then Im gonna show the final pics..

OlBuzzard · « **Reply #109 on:** November 30, 2004, 05:48:14 pm »

boy !! you sure know how to get a fellow all worked up !!

(pacing floor back and forth as expectant father )

OlBuzzard · « **Reply #110 on:** December 06, 2004, 07:40:09 am »

Hey bud ... just curious .. was this ever released ?

markyd · « **Reply #111 on:** December 06, 2004, 02:56:23 pm »

Wings... I lost the texture for the wings when I wiped my puter but their redone now... soooon.. b4 xmas dude

OlBuzzard · « **Reply #112 on:** December 06, 2004, 03:52:28 pm »

thanks man ... much appreciated !!

Sandman3D · « **Reply #113 on:** December 06, 2004, 03:59:00 pm »

markyd · « **Reply #114 on:** December 06, 2004, 04:07:03 pm »

I bought a DVD writer now... shouldnt be having this problem again

wulf111 · « **Reply #115 on:** December 27, 2004, 12:35:54 pm »

bump for news/release

markyd · « **Reply #116 on:** December 27, 2004, 01:16:07 pm »

Oops... sorry guys... gotta blow the dust of this thing and get it released

Gonna work on it tomoz

Starforce2 · « **Reply #117 on:** December 29, 2004, 12:18:14 am »

Texture faster damnit

markyd · « **Reply #118 on:** December 29, 2004, 05:54:13 am »

Will do

News:

Topic: Vigilant Class - updated pic 13/11/04 (Read 15296 times) var addthis_config = {"data_track_clickback":true};

Topic: Vigilant Class - updated pic 13/11/04 (Read 15296 times)