Topic: cable modem (Read 1249 times)

deadmansix · « **on:** October 15, 2004, 10:20:39 am »

ok new to this cable thing it should be hooked up here in a couple hours, and I know there are some ports that need to be open but I cant find out which ones or how its done so if some one could be so kind and point me in the right direction to the post that I know I have read or tell me how to do this I would be greatfull.

thanks

KBF-Crim · « **Reply #1 on:** October 15, 2004, 10:31:38 am »

I think this is what you're looking for...a few posts down from the top...port listings...

http://www.dynaverse.net/forum/index.php/topic,163345674.0.html

Hope it helps

KBF-Kurok · « **Reply #2 on:** October 15, 2004, 10:48:38 am »

If it is just a modem you wont have to open any ports up.If it is a router also refer to crims post above.
Kurok
PS Dont forget to get a good firewallyou will need it on cable.

Kroma BaSyl · « **Reply #3 on:** October 15, 2004, 12:32:47 pm »

Quote from: KBF-Kurok on October 15, 2004, 10:48:38 am

If it is just a modem you wont have to open any ports up.If it is a router also refer to crims post above.
Kurok
PS Dont forget to get a good firewallyou will need it on cable.

Yup, what Kurok said. Only need to open ports if you have the router/firwall device between your PC and cable modem. Otherwise it is just like dialup, so make sure the software/XP firewall is either turned off or properly configured with the right ports open.

News: