Topic: Defiant Refit ???? YET another Updated Pict (Read 2594 times)

OlBuzzard · « **on:** October 02, 2004, 11:03:51 am »

Was messin' around a bit the other night .. came up with these sketches ( I had to call it something ) :

Core · « **Reply #1 on:** October 02, 2004, 11:06:02 am »

OlBuzzard · « **Reply #2 on:** October 02, 2004, 04:16:34 pm »

Thanks

I know it's a little different... and the nacelles are more pronounced than normal.. (as opposed to the totally intergrated design) .. but over all the hull is slightly larger and perhaps sleeker with larger impulse engines to keep it as maneuverable as it's smaller counterpart.

OlBuzzard · « **Reply #3 on:** October 03, 2004, 01:00:43 pm »

Thanks...

I will try to clean it up and add some details to it !

Starforce2 · « **Reply #4 on:** October 03, 2004, 04:12:05 pm »

I think it's a little too thin, but aside from that it rocks. Ofocurse it could just be how the drawing turned out .

OlBuzzard · « **Reply #5 on:** October 03, 2004, 04:45:57 pm »

hmmm you're probably right !! Rookie mistake.. I'll look at it closer .. mean time here is an update on the top view:

OlBuzzard · « **Reply #6 on:** October 03, 2004, 09:41:52 pm »

update with bottom view

Sandman3D · « **Reply #7 on:** October 03, 2004, 10:01:33 pm »

That's cool!!

OlBuzzard · « **Reply #8 on:** October 03, 2004, 10:08:56 pm »

Thanks bud !! glad to see a couple of ya like it !! I'll keep messin' with the side and front views 'til I get it right !!

OlBuzzard · « **Reply #9 on:** October 06, 2004, 11:27:57 pm »

I know this is rough .. and will need more work.. but here is what we have on a 3-d

OlBuzzard · « **Reply #10 on:** October 07, 2004, 07:41:53 am »

Believe me when I tell you . I knew I was rusty ... but, form the way I'm struggling right now.. it appears I've all but lost the ability to do this sort of thing anymore. OY !! This is what happens when stop using a talent you once had. It's comming back . but ever so slowly. Kinda frustrating too !!

wulf111 · « **Reply #11 on:** October 07, 2004, 08:07:03 am »

Hey Buzz?, Mind i try my hand at meshing this baby?

OlBuzzard · « **Reply #12 on:** October 07, 2004, 09:12:50 am »

Quote from: wulf111 on October 07, 2004, 08:07:03 am

Hey Buzz?, Mind i try my hand at meshing this baby?

I would be honored !! I'm still sorting out the front and side views.. can ya give me 'til tonight to do a couple more rough drafts ?? I have spotted a couple of bad rookie oversights !!

(LOL... at age 52 I feel like a beginner working with you guys ... thanks for your Patience )

wulf111 · « **Reply #13 on:** October 07, 2004, 09:30:18 am »

not a problem Buzz take all the time you need

OlBuzzard · « **Reply #14 on:** October 08, 2004, 12:26:25 am »

this is all i had time to do ... got to get back to work in just a few hours

Dizzy · « **Reply #15 on:** October 08, 2004, 01:13:18 am »

Hey thats pretty cool. It really shaped up from the sketch.

I think it may need a limo stretch in the forward part later on tho.

Just a nit pick. Overall, unique enough a take on the defiant...

OlBuzzard · « **Reply #16 on:** October 08, 2004, 07:31:34 am »

thanks man..
thought I've thought about this the last couple of hours.. and I think instead of pitching the outside edges of the nacelles "upward" ... I think they would be better off parallell with the rest of the hull...

I should be able to finalize that tonight !!

again .. thanks Dizzy

Azel · « **Reply #17 on:** October 08, 2004, 12:34:14 pm »

hey Oldman,
would you mind, If I revised the schematic???
I would have it done by saturday afternoon??

OlBuzzard · « **Reply #18 on:** October 08, 2004, 01:34:06 pm »

Quote from: Azel on October 08, 2004, 12:34:14 pm

hey Oldman,
would you mind, If I revised the schematic???
I would have it done by saturday afternoon??

that bad eh ???

J/K ... sure .. go for it... I needs a masters touch .. That would definitely help me see my short comings better.

BTW... I really do think it would be better NOT to pitch the nacelles upward .. but more horizontal with the rest of the hull..

Don't you think so?

wulf111 · « **Reply #19 on:** October 08, 2004, 02:20:30 pm »

well i have an idea of where i want to go with it if you allow me a little artistic license i think i can flesh out a good mesh for this baby

vsftie · « **Reply #20 on:** October 08, 2004, 02:44:16 pm »

buzz i love it.can we call it the valcan/defiant us valcans need more ships

pl pl please!

markyd · « **Reply #21 on:** October 08, 2004, 02:54:39 pm »

Buzz you have doe a great job so far... but can I just say Im very excited about the revision Az will make to your creation....

Mabey I should get out more

OlBuzzard · « **Reply #22 on:** October 08, 2004, 04:09:39 pm »

I'm very flattered guys !!

Actually I like ALL of the suggestions... Tie ... look into the plausibility of your suggestion. If ya need to check with RB .. it's pretty darn good at that sort of thing. If Models Please were here I'd suggest his expertise as well.. ( ** sigh ** kinda miss having him around .. ya know !!)

My only request is to let me take one more crack at this by late tonight (grand daughter is coming over ... she will undoubtedly consume a bit time .... hehehe !!)

I appreciate the thoughts.. comments ... and support !!

AZEL !! as always .. I look forward to your work ... ( always have )

thanks

Azel · « **Reply #23 on:** October 08, 2004, 05:13:13 pm »

Ok mate I'm on it

OlBuzzard · « **Reply #24 on:** October 08, 2004, 11:13:41 pm »

NEXT REVISION.... .. I hope this a bit better.

darkthunder · « **Reply #25 on:** October 09, 2004, 06:00:42 pm »

Yeah keep it up. I'd like to see this one finished as well.

News:

Topic: Defiant Refit ???? YET another Updated Pict (Read 2594 times) var addthis_config = {"data_track_clickback":true};

Topic: Defiant Refit ???? YET another Updated Pict (Read 2594 times)