Taldrenites > Starfleet Command Enhancements and Materials

For anyone thinking of playing on the Dyna, but unsure how to...

<< < (2/6) > >>

Ronin:

--- Quote from: Stylsy on August 27, 2004, 11:03:19 am ---What about the router ports?

--- End quote ---

I hope this helps... it was written for a LinkSys BEFSR41 router, but I believe you will be able to get what you need no matter what router you have.

Once you open your Linksys controls you will click on
ADVANCED and then on FORWORDING. This is where you
will open the ports needed to play online on GSA and
on a Dyna. In your Forwarding section...

Extension Port     Protocol      IP Address    ENABLE

47624 to 47624     TCP           192.168.1.???    X
2300 to 2400       TCP           192.168.1.???    X
6500 to 6500       TCP and UDP   192.168.1.???    X
6667 to 6667       TCP           192.168.1.???    X
3783 to 3783       TCP           192.168.1.???    X
27900 to 27900     UDP           192.168.1.???    X
6073 to 6073       UDP           192.168.1.???    X
28900 to 29901     TCP           192.168.1.???    X
13139 to 13139     UDP           192.168.1.???    X
6515 to 6515       UDP           192.168.1.???    X

Make sure that you ENABLE each of those (off to the
right on each line.) Also, make sure that you have the
correct IP address (where .??? is the location of the
machine you are using. Mine is 100, yours may be
different) for the machine you are using in each line.

If you are not sure what the last three digits are go
to START, then RUN and type in the word "command"
(without the quotes) and hit enter. This will open a
DOS box. In there type "ipconfig/all" without the
quotes and then hit enter. You will get a bunch of
data. One line will read "IP ADDRESS and have the
192.168.1.??? but the ??? will be the location the
router has assigned your machine. That is the number
to put in the Forwarding area where I have ??? above.

 If you have questions feel free to write to me about it.
I don't know much beyond what I just told you, but I will try.  :-)

One thing to remember is that if this works, and then
tomorrow does not work, that I think XP can change
those last three numbers between the machines in your
network. So if it stops working after working a while
use "command" and "ipconfig/all" again and see of the
last three digits of your IP have changed. Happened to
me twice before I figured out what was going
on.

Respects...

Stylsy:
Yeah nice one guys, I had the ports open on my Linksys for SFC3, just couldn't find the ports for OP.

Thanks!

Godfather:
im having problems getting into the dynaverse for OP.i did everything that shogun had instrcuted ,even deleted everything in the wonserever and copied what shogun had.I get a ctd whenever i try to get on the dynavers.any suggestions?

Cleaven:

--- Quote from: Godfather on August 30, 2004, 03:12:24 am ---im having problems getting into the dynaverse for OP.i did everything that shogun had instrcuted ,even deleted everything in the wonserever and copied what shogun had.I get a ctd whenever i try to get on the dynavers.any suggestions?

--- End quote ---

Does the CTD occur after you log in to a campaign? If so it sounds like the issue of starting OP via the SFCOP.exe instead of the starfleetop.exe. Change to the later exe in your icon properties and add in the details of the correct working directory.

Godfather:
yes,my i am starting from the scfop and it occurs when i hit the login button for dynaverse 2.way befroe i even get on the dynaverse.(if that made any sense..lol)

Navigation

[0] Message Index

[#] Next page

[*] Previous page