Topic: so what does tight fiting mean to you

[Age]

   Have you tried WD40.I wouldn't heat it up as it will expand even more.I would use a longer handled  wrench for leverage and pull on it not to hard.I would put some WD40 on the nut and use two combo wrenches lock together at the opening and closing ends.That is one good trick I learned in automotive and works like charm.It is to bad SirGod could beam over to your place.I hope ypu get it off with out breaking anything.  

[Khalee]

 I had not thought of that, but I got no WD40 on hand, and for Nemesis got no Hair Dryer either have not used one of thoes in years.

[Scipio_66]

Quote:
apparently to the ones who put together My toilet it means so damn tight that you will either Call a plumber or break the thing trying to get it apart. And I dought if I can just buy the tank part. some things just dont need to be that damn tight. GRRRRRR

Toilets?  TOILETS?  And to think I opened this thread expecting to see posts about ladies jeans and short skirts.

You guys are such a disappointment.

-S'Cipio , who is sure there are some things in life that DO need to be that damn tight......  

[IKV Nemesis D7L]

Quote:
 I had not thought of that, but I got no WD40 on hand, and for Nemesis got no Hair Dryer either have not used one of thoes in years.  

You can use the torch from a distance, just don't apply the flame directly.  You could even heat a piece of sheet metal with the torch and let it radiate the heat at the plastic unit from a couple of inches.  Or borrow a hair dryer.  

[Khalee]

Well I finaly got the lock nut off put the new assembly in fixed another problem while I was at it, But now the Water supply tube is just a tad short and it not letting the assembly set right, as its leaking but not that bad looks like another couple of bucks to spend.