Topic: Laflin, where are you? (Read 2333 times)

JMM · « **on:** March 04, 2003, 05:31:12 am »

McCloud needs your help man, give er all ye got!

JM

Laflin · « **Reply #1 on:** March 04, 2003, 11:15:00 am »

Hmmm, I am intrigued and confused.

J'inn · « **Reply #2 on:** March 04, 2003, 11:58:51 am »

and disturbed . . . .

JMM · « **Reply #3 on:** March 04, 2003, 12:55:03 pm »

McCloud needs router help amigo...

JM

mc_cloud · « **Reply #4 on:** March 05, 2003, 05:47:08 pm »

yup yup, ok i tried all the port triggering in the world...i give up, thers no hope for me, how do i dmz this damned thing.......it gives me 192.168.1.____ now this computer is behind the router and has an ip of 192.168.1.1 umm i entered that, but it still doesnt work, ACKKKKKKKKKKKkk i cant play sfc2.......... Heeeeeeeeeelp!!!!!!!!! *runs off and cries in the corner, eating goose's kitty-o's*

Kroma_BaSyl · « **Reply #5 on:** March 05, 2003, 05:55:33 pm »

mc_cloud, if you can post or email screen shots of your 'port forwarding' and 'port triggering' configuration pages from the routers web interface, I'm sure I can point you in the right direction, as I have the exact same router and no problems with sfc2. It did take me a while to get it figured out the first time though.

J'inn · « **Reply #6 on:** March 05, 2003, 06:15:50 pm »

Quote:

mc_cloud, if you can post or email screen shots of your 'port forwarding' and 'port triggering' configuration

HEY!! Look you sick puppy!! Last time someone posted stuff like that on these forums they had to shut them down for a week.
Perv!!!

My goodness man!! I just went all day without access to these forums. I'm still shaking!!

Postaholicism . . . . it ain't pretty.

Laflin · « **Reply #7 on:** March 05, 2003, 08:08:06 pm »

Run winipcfg if you are using ME or below - enter the IP you get from that in the IP slot in your router. You do not want to DMZ your router. The IP gained from winipcfg will be used for each port that you open - if you put the wrong IP in then your ports will remain closed. 192.168.1.1 is the value for the router, your machine should be something like 192.168.1.100, 101, 102 etc.

JMM · « **Reply #8 on:** March 05, 2003, 11:11:57 pm »

Laflin, message recieved, I'm having very hard time myself, if you want talk on phone just pm me with ur number, hours, etc... I have two days left...

Always your friend,

JM

News: