Topic: Game crashing with Specs mod (Read 4299 times)

Pestalence · « **Reply #20 on:** April 24, 2004, 09:14:14 pm »

From what i can see.. and I may be wrong...

warp and a disruptor are sharing HP 1 where the Comp should be and there is no Comp listed...

I can't add it to my game at the moment as i need to reinstall from doing some failed experiments.

Praxis · « **Reply #21 on:** April 24, 2004, 09:35:14 pm »

Hmm...it just struck me...perhaps I forgot to add the Hull slots. I just did it on the Mon Cal a minute ago and fixed it...that could explain it.

Praxis · « **Reply #22 on:** April 24, 2004, 11:28:14 pm »

Nope. Still doesn't show up. My X-wing won't show up either.

Praxis · « **Reply #23 on:** April 25, 2004, 11:34:24 am »

Well, I found them in the InvalidShips file and fixed it. Whoo!

Current working ships:
Imperial Star Destroyer
Imperial Star Destroyer Mark 2
X-wing Starfighter
A-wing fighter
Corellian Corvette
Heavy Corellian Corvette

Thanks everyone!

Praxis · « **Reply #24 on:** April 24, 2004, 09:54:22 am »

Hey everyone,
after starting work on the specs side of Sci-fi Bashfest, the game now crashes every time I select Klingons or Romulans.

So far, I moved every Romulan to the Klingon slot (by going through the defaultloadout on the leftmost colomn and changing Romulan to Klingon in every instance). So the Roms and Klingons are in the same slot.

I set in CommonSettings the Roms to have disruptors and pulse phasers and polarons and mytronics.
I also set it to give the Klingons Plasma Torpedoes (since the Roms are in that slot too) and mytronics.

I copied the Romulan Hawk and kept it on Romulan, and stuck the Imperial Star Destroyer model in (yes i did defaultcore first).

I was going to go in the game and customize the ISD and save it in the CustomLoadOut, then copy that to DefaultLoadOut, but then I go in game, and go to Single Player Skirmish, and the moment I click on either Klingons or Romulans the game goes CRASSSH.

Can anyone help?

Praxis · « **Reply #25 on:** April 24, 2004, 10:07:30 am »

Okay, by replacing the commonsettings with the originals, the Klingons now work (sorta).

All the Romulan ships I turned into Klingons are gone- they don't show up.

There are no Romulan ships, where there should be a Star Destroyer.

What am I doing wrong here?

DonKarnage · « **Reply #26 on:** April 24, 2004, 10:29:41 am »

what game, that should help to know if its op or sfc3?.

Praxis · « **Reply #27 on:** April 24, 2004, 10:35:45 am »

Well gee, ya think that they have a DefaultLoadOut and DefaultCore in OP?

It's SFC3, yeah.

The_Pelican · « **Reply #28 on:** April 24, 2004, 10:46:09 am »

Did you change the ShortEmpireName section in the RaceNames.gf file? That sounds like what you've done. You CANNOT change any of these names - you can move them about, such as swapping Cardassian & Borg between 3 & 5 as I (and a few others) have done. But you CANNOT put in new names.

VSFTie · « **Reply #29 on:** April 24, 2004, 10:55:24 am »

yup what pel says . thats what it sound like to me 2

Praxis · « **Reply #30 on:** April 24, 2004, 10:56:23 am »

Yup, you're right, that messed it up. I fixed that, and now the Klingons work, but the none of the Romulan ships I moved to the Klingon race slot show up, and the Star Destroyer in the Rom race slot is missing.

It doesn't crash when I select Klingon any more, but still when I select Rom. And if I go through the vessel library, there are no Romulan ships, when there should be a Star Destroyer. And the Romulan ships that I changed the race to Klingon aren't showing up.

The_Pelican · « **Reply #31 on:** April 24, 2004, 11:04:47 am »

What race is in the Romulan slot - as in what race is listed in the RaceNames.gf file - it must match the race listed in the RaceNames.gf file.

On the ships not showing up - did you remember to set the ItemRules.gf file up correctly?

Name = "ItemRules"
[Mixing]
MixRacialTech = 1

[DefaultSkirmishShips]
0 ="Saber"
1 ="B'rel"
2 ="Talon"
3 ="Hideki"

You must make sure that you have the 1 ticked if you are mixing technology.

And you must make sure the default skirmish ship is a ship in that race, and matches a SubName, or you'll get a blank ship(or another crash).

Praxis · « **Reply #32 on:** April 24, 2004, 11:12:05 am »

You...are a genius...

Looking over your itemrules...the one thing I was missing was MixRacialTech=1. I guess that was blocking the Roms ships because they had plasma torps!

Thanks! The Klingon ships show up!

Unfortunately, the Star Destroyer still doesn't- still nothing in the Rom slot from vessel library, and it crashes from Skirmish.

Name = "ItemRules"
[Mixing]
MixRacialTech = 1

[DefaultSkirmishShips]
0 ="Akira"
1 ="Fek'lhr"
2 ="Star Destroyer"
3 ="Sphere"

Name = "RaceNames"

// These are used whenever race names are needed. They are the ONLY place you must change these names.
// They MUST match the order of the races. Modders, this one's for you.

[FullEmpireNames]
0   = "United Federation of Planets"
1   = "Klingon Empire"
2   = "Romulan Star Empire"
3   = "Borg Collective"

4   = "Species 8472"
5   = "Cardassian Union"
6   = "Ferengi Alliance"
7   = "Rakellians"
8   = "Pirates"
9   = "Contested Sector"

10   = "All Races"

[ShortEmpireNames]
0   = "Federation"
1   = "Klingon"
2   = "Romulan"
3   = "Borg"

4   = "Species8472"
5   = "Cardassian"
6   = "Ferengi"
7   = "Rakellian"
8   = "Pirate"
9   = "Neutral"

10   = "All"

Praxis · « **Reply #33 on:** April 24, 2004, 11:13:34 am »

Here's my DefaultCore for the SD:

60 CA 4800 2000 1600 7000 4600 650 16000 Imperial-StarDestroyer rsd PrimaryHP:1:150_210:2:330_30:3:330_30:4:300_360:5:0_60:6:240_300:7:60_120:8:240_300:9:60_120:10:150_210 HeavyHP: HullHP:1:2:3 BridgeHP:1 ship Mines:10:10:10 Marines:37:37:37 Shuttles:2:5:3

Here's my defaultloadout for the Star Destroyer (not configured weapon wise, just the model and UI and that stuff, I was going to do what you said with CustomLoadOut):

Romulan Imperial-StarDestroyer Star Destroyer rsd R-TRACTOR-II:3 R-TRANSPORTER-II:1 R-COMPUTER-II:1 OFFICER:ENGINEER:TOLANA:11:12:12:Junior:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:4. Veteran:4. Veteran:4. Veteran:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic: OFFICER:SECURITY:SEMPUS:12:13:10:Junior:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:5. Expert:3. Skilled:4. Veteran:1. Basic:1. Basic:1. Basic: OFFICER:HELM:SEMPRINNIUS:13:13:10:Junior:5. Expert:3. Skilled:5. Expert:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic: OFFICER:OPS:TIERCELLUS:14:11:11:Junior:1. Basic:1. Basic:1. Basic:4. Veteran:4. Veteran:5. Expert:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic: OFFICER:TACTICAL:VIRANT:14:12:11:Junior:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:3. Skilled:3. Skilled:3. Skilled: OFFICER:MEDICAL:EPLOR'AN:12:11:13:Junior:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:4. Veteran:5. Expert:4. Veteran:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic:1. Basic: R-SHIELD-IV:4 R-SHIELD-IV:2 R-SHIELD-IV:3 R-ARMOR-III:2 HEAVY PLASMA TORPEDO:12 R-DISRUPTOR IIIF:1 R-DISRUPTOR IIIF:2 R-SHIELD-V:1 R-IMPULSE-II:2 R-THRUSTER-I:3 R-WARP-VI:1 R-CLOAK-II:2

The model folder is "rsd"

Praxis · « **Reply #34 on:** April 24, 2004, 11:33:19 am »

Okay, I stuck in my old CustomLoadOut that had a customized Romulan ship. The custom rommie is the only ship that appears at the Vessel Library screen in the Rom section, and it crashes in a skirmish.

Praxis · « **Reply #35 on:** April 24, 2004, 02:13:05 pm »

bump?

The_Pelican · « **Reply #36 on:** April 24, 2004, 04:58:31 pm »

Two questions:-

1:- Is the Star Destroyer mentioned in the "InvalidShips.txt" file.

2:- Are you using Excel or Notepad to edit. If you are using notepad, stop and switch to Excel. It's both easier & you are less likely to make silly errors that stop a ship from loading up.

On the Star Destroyer, it's simple - you have a Comp & a Cloak fitted to the ship, but only 1 Bridge Hardpoints. You need to remove the cloak.

Praxis · « **Reply #37 on:** April 24, 2004, 05:14:49 pm »

DOH! Forgot I was copying a Rom!

I copied a Rom on every ship...that explains it!

1-No, it's not mentioned...
2-Excel and CoreEdit

TY let me try removing the cloak

Praxis · « **Reply #38 on:** April 24, 2004, 05:49:04 pm »

Strange...I did that with all the SW ships I had done, but only the ISD showed up. No A-wing or ISD mark 2...

But...IT WORKED! YAAAAY! Thanks, Pelican!

Praxis · « **Reply #39 on:** April 24, 2004, 05:50:27 pm »

Strangely enough...the hardpoints on the UI don't show up...ah well, thats a bug to work out later. TY again!

News:

Topic: Game crashing with Specs mod (Read 4299 times) var addthis_config = {"data_track_clickback":true};

Pestalence

Praxis

Praxis

Praxis

Praxis

Praxis

DonKarnage

Praxis

The_Pelican

VSFTie

Praxis

The_Pelican

Praxis

Praxis

Praxis

Praxis

The_Pelican

Praxis

Praxis

Praxis

Topic: Game crashing with Specs mod (Read 4299 times)