Topic: models-please request part 2 (Read 2806 times)

blitzy · « **on:** March 22, 2004, 06:07:31 pm »

Here's the updates. on models-please request. All comments are welcome. BTW, sensor pod by terridyne, although I have to check with him about it (I think he's ok with it though).

ModelsPlease · « **Reply #1 on:** March 22, 2004, 06:47:40 pm »

Dude you ROCK !!!!!
I just have a couple of things....

1) The area under the narcell.If you check the schematic you'll see it only attaches in the rear of the Narcell under where the ships registry is,it is this area where I want the shuttle bay to be.
2) That attachment should also be even with the narcell (see schematic) not trailing off behind the ship.
3) And in the front of the attachment instead of what appear to be torp tubes,I would like the deflector there.

If you PM me your email address I can send you my revised schematics with anotations on them

Thank you sir this is awesome work.If you consider yourself "limited" think again.You're very talented.

-MP

starforce2 · « **Reply #2 on:** March 22, 2004, 08:50:40 pm »

what's it called? It's not bad. Isn't this a plastic model recreation from somewhere?

blitzy · « **Reply #3 on:** March 22, 2004, 09:05:56 pm »

I bashed it from this picture

blitzy · « **Reply #4 on:** March 22, 2004, 09:06:56 pm »

I see your point. I was thinking about putting the shuttlebay on the back of the neck.

blitzy · « **Reply #5 on:** March 22, 2004, 09:29:58 pm »

I think it needs connected at the front still, but what do you think?

ModelsPlease · « **Reply #6 on:** March 22, 2004, 11:45:33 pm »

Quote:

I see your point. I was thinking about putting the shuttlebay on the back of the neck.

That's where the impulse engine goes on the ambassador class.

that's why I chose that particilar area for the shuttle bay sir

ModelsPlease · « **Reply #9 on:** March 23, 2004, 12:32:24 am »

Ok I've also sent my deflector idea as well sir

blitzy · « **Reply #10 on:** March 23, 2004, 09:17:08 pm »

The impulse engines are actually on the saucer on this one, although I think that can be changed. I'll post a reference pic tomorrow.

ModelsPlease · « **Reply #11 on:** March 23, 2004, 09:48:12 pm »

Interesting, it's on the neck on the Amb herself.what model did you start out with sir.Oh BTW I love the other ship you're working on. I too like the working man class ships.......I.E. the smaller ones.Both these ships are worthy of a place in my fleet.

-MP

blitzy · « **Reply #12 on:** March 24, 2004, 04:52:12 pm »

Here's the next pair of pics

See the impulse enignes on the sides of the saucer. I thought that might be good in event of ejecting the warp core, but it could be moved.

blitzy · « **Reply #13 on:** March 24, 2004, 04:53:05 pm »

Forgot, this is also based on the Belmont, A wonderful ship of Mackie's.

Azel · « **Reply #14 on:** March 24, 2004, 05:01:59 pm »

Damned Fine ship if you ask me
and Damned Fine work mate!!

ModelsPlease · « **Reply #15 on:** March 24, 2004, 05:19:07 pm »

Yeah that looks good,I see your point about the shuttlebay on the neck. I say go for it,you're doing an awesome job !!!

-MP

ModelsPlease · « **Reply #16 on:** March 29, 2004, 02:30:36 am »

Bump

ModelsPlease · « **Reply #17 on:** March 31, 2004, 04:00:37 am »

Bumperoo

ModelsPlease · « **Reply #18 on:** December 18, 2004, 02:31:21 pm »

Whatever happened to this ship ?

Chrystoff · « **Reply #19 on:** December 19, 2004, 11:57:30 am »

Quote from: ModelsPlease on December 18, 2004, 02:31:21 pm

Whatever happened to this ship ?

MP, I meant to ask you: You have a really nice GAFY retexture standard FCA on your site. But now the link doesn't work. Is there some place else that I can grab that?

ModelsPlease · « **Reply #20 on:** December 19, 2004, 04:16:35 pm »

Quote from: Chrystoff on December 19, 2004, 11:57:30 am

Quote from: ModelsPlease on December 18, 2004, 02:31:21 pm
Whatever happened to this ship ?
MP, I meant to ask you: You have a really nice GAFY retexture standard FCA on your site. But now the link doesn't work. Is there some place else that I can grab that?

I sent Mr Cue a PM about it. Hopefully he'll have it fixed shortly. Thanks for bringing it to my attention. And as for this ship, it's one of two I had designed and asked for a while ago,but never recieved them.Both are Ambassador era ships designed to help fill in the gaps. Actually I haven't seen Blitzy in a while. I hope verything is ok .SO BUMP again lol
-MP

GotAFarmYet? · « **Reply #21 on:** December 19, 2004, 04:33:08 pm »

Quote from: Chrystoff on December 19, 2004, 11:57:30 am

Quote from: ModelsPlease on December 18, 2004, 02:31:21 pm
Whatever happened to this ship ?
MP, I meant to ask you: You have a really nice GAFY retexture standard FCA on your site. But now the link doesn't work. Is there some place else that I can grab that?

Which one are you talking about from here?
http://www.dynaverse.net/forum/index.php/topic,163348757.0.html

Chrystoff · « **Reply #22 on:** December 19, 2004, 04:54:40 pm »

Quote from: GotAFarmYet? on December 19, 2004, 04:33:08 pm

Quote from: Chrystoff on December 19, 2004, 11:57:30 am
Quote from: ModelsPlease on December 18, 2004, 02:31:21 pm
Whatever happened to this ship ?
MP, I meant to ask you: You have a really nice GAFY retexture standard FCA on your site. But now the link doesn't work. Is there some place else that I can grab that?

Which one are you talking about from here?
http://www.dynaverse.net/forum/index.php/topic,163348757.0.html

Yep, that's the one. Great textures on that!

GotAFarmYet? · « **Reply #23 on:** December 19, 2004, 05:24:40 pm »

Yes but which one there are about 6 different ships there

Chrystoff · « **Reply #24 on:** December 19, 2004, 10:24:25 pm »

Quote from: GotAFarmYet? on December 19, 2004, 05:24:40 pm

Yes but which one there are about 6 different ships there

Oh! It's the standard P81 FCA with the almost-white retexture job, much like your GAFY retextures.

GotAFarmYet? · « **Reply #25 on:** December 19, 2004, 10:30:24 pm »

ARGH!

There are 5 on the bottom, and one, the Lexington, was up at the top. Which one are you looking for I do have them all and can send the one you need if you can tell me which one and provide a E-Mail address.

News:

Topic: models-please request part 2 (Read 2806 times) var addthis_config = {"data_track_clickback":true};

blitzy

ModelsPlease

starforce2

blitzy

blitzy

blitzy

ModelsPlease

ModelsPlease

ModelsPlease

ModelsPlease

blitzy

ModelsPlease

blitzy

blitzy

Azel

ModelsPlease

ModelsPlease

ModelsPlease

Topic: models-please request part 2 (Read 2806 times)