Topic: Request for GAFY?  (Read 2272 times)

0 Members and 1 Guest are viewing this topic.

starforce2

  • Guest
Request for GAFY?
« on: November 23, 2003, 06:01:16 pm »
Can I get a red impulse texture for ships suck as the CVL? I've noticed you using blue on some of them. They should all be the same so I would think I only need one.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #1 on: November 23, 2003, 06:21:11 pm »
Pretty much it would only be necessary to replace on texture on most ships (FCA3 for example) with the new texture.

Actually in the last registry pack I released for the Connie type saucer I have about 10 impulse Engine clours. There is a  Red one in there the orginal from from some one. If you are talking about the one I used on the Mirnada I would have to make it. It can be done but would have to wait until wesday as I am away from home until tuesday.

So if that one will work for you then cut and paste away. If you want the one that follows the Excelsior/Miranda style then I will do it on Wensday and just replace the models as i go. You are right I should pick one to go with and use them.

starforce2

  • Guest
Re: Request for GAFY?
« Reply #2 on: November 23, 2003, 07:08:19 pm »
I believe I only have the original p81 red impulse textures, which on your retextures would look odd, plus I can't copy and paste anything that isn't a square and lining it up in the middle would be hard...I don't know how to really fix stuff like that.

BTW, since you did the peregrine and defiance, are you also doing the solidarity?
« Last Edit: December 31, 1969, 06:00:00 pm by starforce2 »

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #3 on: November 23, 2003, 09:42:08 pm »
I no longer have the solidarity model I had it all done but the top pod, but then a HDD problem removed that model and a few others I had. I have replaced the other models but could not find the solidarity, and since I had enough for now to finish (the HDD failure put me behind lost all WIPs). So if I find it I will look it over but currently it would low on the list.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #4 on: November 23, 2003, 10:33:18 pm »
Ok was able to get someone to update my files at home for me.

So this have been updated and uploaded with the new Impulse Engine Texture. It is the same type I use on Excelsior and Miranda. I also updated the Saucers rims to the new style I started to use, and added a new light map to it as well.

I don't know if I will update the Miranda with it or not but probably will by Christmas if I chose to it is not hard to since the textures are done I would have to update the side of the ship where the Warp engines attach.

List of what was updated:
Banting_retextured
Belknap_retextured
FCA2_retextured
FDn+_retextured
Federation Light Carrier
U.S.S. Davids
U.S.S. Defiance

I also added this one, it has to models in it the orginal from DarkMatrix and a modified one by me.
   

If there are any errors let me know
« Last Edit: December 31, 1969, 06:00:00 pm by Captain Ron »

starforce2

  • Guest
Re: Request for GAFY?
« Reply #5 on: November 24, 2003, 02:03:21 am »
Quote:

I no longer have the solidarity model I had it all done but the top pod, but then a HDD problem removed that model and a few others I had. I have replaced the other models but could not find the solidarity, and since I had enough for now to finish (the HDD failure put me behind lost all WIPs). So if I find it I will look it over but currently it would low on the list.  




I've got it hosted on my nightsoft space. www.nightsoftware.com/starforce/SFC

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #6 on: November 24, 2003, 11:24:29 am »
well lets hope it works this time so far every time at about 68% the download stops.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #7 on: November 24, 2003, 05:17:00 pm »
The file still comes up invalid after 68%

Also this is a bump to say that there is a ship release also in here.

starforce2

  • Guest
Re: Request for GAFY?
« Reply #8 on: November 24, 2003, 05:34:53 pm »
f***en nightsoft. I'll hafta msn it over to ya. Or stick it on my other site.


http://www.armadafleetcommand.com/~starforce2/Solidarity.zip

try that one
« Last Edit: December 31, 1969, 06:00:00 pm by starforce2 »

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #9 on: November 25, 2003, 12:29:14 am »
LOL,

Well at least this link worked.

Have it all done but the top pod, will finish it sometime or another.

The Churchill is almost done. Needs delfector siding work, some on the top and a pair of phasers and she will be done. All I will need is the permission at that point.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #10 on: November 25, 2003, 11:34:13 am »
Oh yah,

 Linky!

So if all goes well I should have 2 ships done by the weekend the solidarity and the Churchill (if I get the Permeission to release it once it is finished)

starforce2

  • Guest
Re: Request for GAFY?
« Reply #11 on: November 25, 2003, 09:13:32 pm »
you plan on doing the conelly too? I had someone do me registrey fixes for it but he upsized 256 to 512 textures and the clairty is shot. I'm wondering if I should bother having it redone with the 512's I found or just wait for the high res from you. If you have no plans for it I'll have it redone.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #12 on: November 25, 2003, 11:26:28 pm »
What ship is the connelly?

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #13 on: November 26, 2003, 01:03:32 am »
Nevermind found it at Mackies place.

Both are done but still need registries, any ideas what should be on them?

starforce2

  • Guest
Re: Request for GAFY?
« Reply #14 on: November 26, 2003, 02:11:46 am »
I just had conelly put on it.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #15 on: November 26, 2003, 03:45:31 am »
Well here you go but neither say Conelly, unfortuantly...

You have the U.S.S. Bozeman NCC-1941 (retextured Conelly)

 

You also have the U.S.S. Akagi NCC-62158 (retextured Solidarity)

 

Churchill is done but I am still rethinking an area on it so I have not put in the request for Release yet. Hopefully I will see what is irking me on it so I can fix it and put in that application. I know DTW has been patiently waiting for me to finish this one.
 

starforce2

  • Guest
Re: Request for GAFY?
« Reply #16 on: November 26, 2003, 05:19:31 am »
WOW. Man does that look a lot better. I'll just use that one. Released the other one with enterprise on it for the lower memory users.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #17 on: November 26, 2003, 04:25:50 pm »
Bump to say there are model releases in here, since they all happened at 2 am last night it is easy to miss.

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #18 on: November 27, 2003, 01:03:49 am »
Bump

Captain Ron

  • Guest
Re: Request for GAFY?
« Reply #19 on: November 28, 2003, 02:57:08 am »
Once again Bump!