Topic: !!!!Atolms Gorn Cruiser Finished!!!! (Read 2402 times)

Steelviper33 · « **on:** November 02, 2003, 01:53:40 pm »

Here she is. She is also lit and she has a break mod.
She still needs to be hardpointed though, but i need to talk to Atolm about that.

The blue on the Nacelles and the Saucer are Fleet Identification marks. Blue for one fleet, maybe red for another, black for special ops, so on and so forth.

This is my first model to be completely skinned from the ground up. Thank to Atolm for the Model.

Stormbringer · « **Reply #1 on:** November 02, 2003, 02:18:09 pm »

I like it but I need a kitbash already. The whole ship rolled 90 degrees, the nacelles rolled almost 90 degrees, the ports on the front of the rear disk rotated 90 degrees and turned into swivel mounted plasma launchers, add a rear bridge and swivel mounts on the rear upward and or bottom quadrants of that rear disk, windows and portals added appropriately to the new orientation of the rear disk, protrusions like antenna arrays around the bridge, Shuttle track systems on the secondary hull. Detailing, like the antennas, vents, bumps and rings like on the millenium falcon, for APRs and such. The bridge should be a truncated pyramidal skyscraper like conning/control tower above the plasma swivels. the skin should be mettalic bronze.

starforce2 · « **Reply #2 on:** November 02, 2003, 03:26:37 pm »

atolm you planning to do your original textures, like what was on that other gorn?

Steelviper33 · « **Reply #3 on:** November 02, 2003, 03:37:24 pm »

Quote:

I like it but I need a kitbash already. The whole ship rolled 90 degrees, the nacelles rolled almost 90 degrees, the ports on the front of the rear disk rotated 90 degrees and turned into swivel mounted plasma launchers, add a rear bridge and swivel mounts on the rear upward and or bottom quadrants of that rear disk, windows and portals added appropriately to the new orientation of the rear disk, protrusions like antenna arrays around the bridge, Shuttle track systems on the secondary hull. Detailing, like the antennas, vents, bumps and rings like on the millenium falcon, for APRs and such. The bridge should be a truncated pyramidal skyscraper like conning/control tower above the plasma swivels. the skin should be mettalic bronze.

Thats a hefty request.

Ill see what i can do, but its not gonna be today, im burnt out for the day

Stormbringer · « **Reply #4 on:** November 02, 2003, 03:45:32 pm »

That way when you start adding saucers for the cc and dn classes you can keep the rear vertical disk for a weapons platform and shuttle control center emergency bridge. You could even ad a belly verticle disk under the forward or middle saucers (staggered) for the extra plasmas. or make on a shuttle bay.they could be like fins on a shark except backwards and packing heat. The one on the center saucer one quadrant opening to the front 33 percent the size rear one. If there is one on the front saucer it could be 2 quadrants the same as the rear vertical disk on the belly of the beast.

Azel · « **Reply #5 on:** November 02, 2003, 03:49:37 pm »

SPEECHLESS

Stormbringer · « **Reply #6 on:** November 02, 2003, 03:51:22 pm »

I did not think you'd do it right away. I'm sure you want to tinker with this one for a while. But when the time comes to kit bash the remaining classes you might try this one for a warm up? Please?

Azel · « **Reply #8 on:** November 05, 2003, 07:35:37 pm »

Bump Please

!!!

Desty_Nova · « **Reply #9 on:** November 06, 2003, 12:15:49 am »

Is there somewhere we can get this yet?

Azel · « **Reply #10 on:** November 06, 2003, 11:20:31 am »

Soon

Steelviper33

Re: !!!!Atolms Gorn Cruiser Finished!!!!

News: