Topic: Late TMP-Pre TNG Gorn Cruiser :)!!! (For Lost Era Mod)!!! (Read 4778 times)

Azel · « **on:** October 30, 2003, 01:54:14 pm »

She's alittle High poly but I hope you Guys Like her

She Needs Scales...I am posting a zip with a Mod, MS3D, and LW files...for any who wish to attempt to Scale her

Enjoy

And the Zip

http://www.frost-works.com/watchtower/GornCruiser.zip

Stormbringer · « **Reply #1 on:** October 30, 2003, 03:19:18 pm »

This achieves the effect I wanted even if the details vary a little. Astounding Job. where's the rest of them?

Azel · « **Reply #2 on:** October 30, 2003, 03:23:53 pm »

Quote:

This achieves the effect I wanted even if the details vary a little. Astounding Job. where's the rest of them?

The Rest???

so the Verticle half saucer is ok and the verticle warp nacelles???

Stormbringer · « **Reply #3 on:** October 30, 2003, 03:26:43 pm »

It is your ship. If it were mine I'd rotate her Whole body 90 degrees and perhaps do the same again to the nacelles. Then go to gorn alloy colors.

Stormbringer · « **Reply #4 on:** October 30, 2003, 03:30:15 pm »

After that the rest is just detailing and not strictly necessary. You'd still have the vertical disk element; it would just be in the back.

Stormbringer · « **Reply #6 on:** October 30, 2003, 03:39:38 pm »

Outstanding!

I've been trying to get someone to do something like this since the advent of SFCI.

Steelviper33 · « **Reply #8 on:** October 30, 2003, 04:05:52 pm »

Atolm.

Great ship man, i love it, id love to see a whole fleet of her done (in fact ill make kitbashes once shes textured)
But i have only one request. Would it be possible to make either an outcropping or a recess of where the bridge is on the front saucer.
Normally it would be at the top of the saucer, but that couldnt really apply here.

CptSavage · « **Reply #9 on:** October 30, 2003, 04:14:36 pm »

Gettin better Atolm, alot better.

Klingon Fanatic · « **Reply #10 on:** October 30, 2003, 04:36:53 pm »

TMP Gorn... Well you know this will have to go with my Gorn collection

Qapla!

KF

Azel · « **Reply #11 on:** October 30, 2003, 04:55:39 pm »

Thanks Capt
And KF, told you there would be more non Feds to come

Steelviper33 · « **Reply #12 on:** October 30, 2003, 06:28:33 pm »

How is this for texturing? I just did this in a few hours. Tell me all what you think.

Azel · « **Reply #13 on:** October 30, 2003, 06:37:52 pm »

A Few hours???
You did that is a Few hrs???

Amazing work man...simply amazing...
Damn...So pretty

Smiley · « **Reply #14 on:** October 30, 2003, 06:45:09 pm »

Very Impressive work there!

Steelviper33 · « **Reply #15 on:** October 30, 2003, 07:02:50 pm »

Here is the next image.

Added a coupla affects to the outer Greeble ring, added windows, and added illumination.

EDIT: Oops same image

Makotokat · « **Reply #16 on:** October 30, 2003, 07:30:51 pm »

Very nice.....like the colour!

Smiley · « **Reply #17 on:** October 30, 2003, 07:34:04 pm »

Oh, hehe, now everything looks out the other way - what I mean is that now what did look like it was indented, now appears raised...Gorn have funny-coloured rooms! lol

Steelviper33 · « **Reply #18 on:** October 30, 2003, 08:06:20 pm »

Okay, i see what you mean, its been corrected

Azel · « **Reply #19 on:** October 30, 2003, 09:00:30 pm »

NICE!!!

Desty_Nova · « **Reply #20 on:** October 30, 2003, 09:00:37 pm »

Freakin' awesome model, Azel! I just love this design! I like the textures so far as well, although I think I almost prefer the windowless version more.

Steelviper33 · « **Reply #22 on:** October 30, 2003, 09:11:04 pm »

Not a problem at all.

I wont be able to do much tomorow, Im staying after school tomorow to help with this thing were doin called "safe holloween" so the earliest ill be able to do anything is saturday noon-ish.

Lemme know if there is anything else ye need.

EDIT: Just to let you all know, the textures are 1024x1024, but i will be doing 512x512 as well

Desty_Nova · « **Reply #23 on:** October 30, 2003, 09:37:46 pm »

Cool. Can't wait to see both versions.

sandman69247 · « **Reply #24 on:** October 30, 2003, 10:41:50 pm »

WOWZER!!! Now THAT is a Gorn! Great work Azel and Steelviper...awesome job!!

I_Mudd · « **Reply #26 on:** October 31, 2003, 12:10:10 pm »

" Oh, me so Gorny! Me so Gorny! Oh, me so Gorny! Atolm's ship's so fine! ... "

I_Mudd.

Steelviper33 · « **Reply #28 on:** November 01, 2003, 12:58:46 pm »

Update!

Here is a good shot of the greebles i put on the inside of the saucer rim.

And here is a good shot of what i did with the rear saucer.

Azel · « **Reply #29 on:** November 01, 2003, 01:00:37 pm »

Oh sooo sweet man

Steelviper33 · « **Reply #30 on:** November 01, 2003, 01:10:40 pm »

Atolm, can I assume that those indents in the main hull are shuttlebays?

Also, do you have any criticism or advice to throw out there?

Desty_Nova · « **Reply #31 on:** November 01, 2003, 05:48:47 pm »

That is so awesome. Keep up the excellent work man.

Azel · « **Reply #32 on:** November 01, 2003, 07:21:46 pm »

SteelViper...yeah those are shuttlebays man...I would only say that if yoiu could use the style of shuttlebay details on the old SFB Gorn shuttlebay...if that helps

sorry
As for the other details...its up to you...I like the style that you are working with...I trust you man

Thanks Man

Steelviper33 · « **Reply #33 on:** November 01, 2003, 08:08:41 pm »

Okay, what did the SFB gorn shuttlebays look like?

Steelviper33 · « **Reply #34 on:** November 01, 2003, 08:21:12 pm »

UPDATE:

Okay, i got another question to throw at you, and stop me if im wrong.

This is a ship that was used by the gorn when the gorn was part of the federation. right?
well in that case, how would they identify what ship was what. Normally what would happen on federation ships there would be a regestry number and name on the ship, right?
okay, now what about on this ship?
well, heres what i thought, On the Nacell struts ive created a place that would work nicely with a jet black Gorn Symbol and i got to thinking, what if the gorn didnt ID their ships by a worded name, but by a symbol that meant a name.
also, how, if the gorn where part of the federation, how would federation people identify them?
well there is another part on the hull that would look very good with an English name of the ship. Please, tell me what you think.

Steelviper33 · « **Reply #35 on:** November 01, 2003, 10:18:47 pm »

Oh, btw, heres something else i thought id toss out.

Well actually two of them.

The end of the Hub where the delfector sits, take out the greebles and light ring there, and put another place to put the Gorn symbol name of the ship.

Also, on the Nacelles (and if the former idea is taken in - the "hubcap") the teal green grill could be changed different colors depending on what fleet it is.

Azel · « **Reply #36 on:** November 01, 2003, 11:27:33 pm »

WOW!!!!
Truely amazing

Ok the Gorn are Not part of the Federation...never have been...they are a seperate government but are Alies...kinda

So the ship would not have Terran Nomenclature and Sinage...so I would stick with just the purely Gorn Signage

The Shuttlebay details can be found at Desty Nova's web site

in the Gorn section

Steelviper33 · « **Reply #37 on:** November 01, 2003, 11:28:35 pm »

okay

Can i still keep the idea of different colored trim means a different fleet?

Azel · « **Reply #38 on:** November 01, 2003, 11:30:35 pm »

Sure

In the Comic Graphic Novel ST: TNG.."Gorn Crisis", the Gorn main fleet is called the "Black Crests"

Steelviper33 · « **Reply #39 on:** November 02, 2003, 12:23:11 pm »

Here she is. Shes done skinning.
Right now she has a ferengi name, but that can easily be changed
She still needs lightmaps which is easy.
Also at the moment she is part of the blue-colored fleet. (someone else can come up with names, i dont feel like it)

Azel · « **Reply #40 on:** November 02, 2003, 03:56:07 pm »

SWEEETNESS!!!
You can skin for me any day

Stormbringer · « **Reply #41 on:** November 03, 2003, 04:37:46 pm »

Atolm: If I draw an engineering/secondary hull could you pease create a crude mesh based on it? At your convenience, of course.

Kroma_BaSyl · « **Reply #42 on:** March 15, 2004, 10:27:33 am »

bump.....is this one done too?

Kroma_BaSyl · « **Reply #44 on:** March 15, 2004, 02:35:54 pm »

thanks, for the updates, as you can tell I am a bit of a Gornophile.

News:

Topic: Late TMP-Pre TNG Gorn Cruiser :)!!! (For Lost Era Mod)!!! (Read 4778 times) var addthis_config = {"data_track_clickback":true};

Azel

Stormbringer

Azel

Stormbringer

Stormbringer

Azel

Stormbringer

Azel

Steelviper33

CptSavage

Klingon Fanatic

Azel

Steelviper33

Azel

Smiley

Steelviper33

Makotokat

Smiley

Steelviper33

Azel

Desty_Nova

Azel

Steelviper33

Desty_Nova

sandman69247

Azel

I_Mudd

Azel

Steelviper33

Azel

Steelviper33

Desty_Nova

Azel

Steelviper33

Steelviper33

Steelviper33

Azel

Steelviper33

Azel

Steelviper33

Azel

Stormbringer

Kroma_BaSyl

Azel

Kroma_BaSyl

Topic: Late TMP-Pre TNG Gorn Cruiser :)!!! (For Lost Era Mod)!!! (Read 4778 times)