Topic: requesting assistance please

[olbuzzard]

I hace a project that is in despirate need of completion.    I am hoping that some one here will have pitty on the plea of this old man and either help with the tast ...  or perhaps hook me up with someone who has the 3-D program to build it.  If you would be so kind as to post here or send me a response to my e-mail addy :  quietshadeaux@hotmail.com.

Thanks

[wanderer]

Hey, ol' man

To help the guys out here, could you post some pics or a general idea of what you would like built? That would give the modelers an idea if it's something they can/want to tackle.

It's a CLCX, right? Sounds pretty cool to me.  

[olbuzzard]

my apologies for the delay in responding...  work has really been both time consuming and stressfull  (60 hours + the last 2 weeks ...  averaging 55 +  for several months now.  )

I have  several picts  to choose from.  We will do a consolidation of them and post soon.  We are also building a plastic mod and have the primary hull at aprx 75 to 80% done.

Thanks for your interest.  

[olbuzzard]

As requested..  some picts and specs ...  my apologies for the lack of tech expertese .  There are a couple things that will need to be changed when the real 3-D is done.  I do know enough about drafting to tell  ya  that there are some over sights on the front and rear views of the naucells.  And I dont have the proper programs to give ya a better review of the weapons arcs and the shields...  ( all is borrowed stuff fromt Taldren of course courtesy Photo Shop  ...  cut and paste ...  etc ... etc...  )  

I hope this helps.  I will check back here later.  Either send me a PM...  or E-mail ..  which ever is good for you.

Thanks again

[DarkMatrix]

gotten this far on it just warpengines have got me still working out how to do them
what u think so far?







this is kitbash not new model i`ll update all textures later to get them closer for you
its good design well worth doing



mesh/textextures: P81
Kitbash/porting:darkmatrix

DM

[Captain Ron]

Hey darkdrone if you need textures let me know I just have some warp engine textures to finish working on then I will be free for about a week. I can look over anything you set up and see what I can do with them, then send it back to you. I just about finished my Reliant (thing had more little details then I thought!) and when it is done I have a Frigate to do that i do not want to start.

Reliant Pictures! After I redo the warp engines, I hate them currently, I can start on that one or finish it up. I also am redoing the Banting, with and without the Upper photon launchers, and am down to its engines also. All this work should be done by the weekend, so if you can catch me on MSN we can work it out.

-GAFY?

[DarkMatrix]

thanks for the offer

the warpengines are a nightmare to me they seem mix of tng(side and back) and tos(front)

tryed modding the galaxy engines but no luck they got other idea to try out now

DM

[DarkMatrix]

Title      : U.S.S Bass master
Version      : 1.1
Date      : 13/10/2003
Author      : Rick Knox a.k.a pneumonic81
Author                               : Atrahasis
Kitbash Author                  : DarkMatrix
Design  Author                  : olbuzzard




olbuzzard this is as close as i get it to what u want

if anyone can add the name and nubers for the reg that be great let me know and i`ll post the files for download

DM

[DarkMatrix]

ingame/op






DM

[DarkMatrix]

Did these up too not sure if you want them or not

DM

[Captain Ron]

If you put it up DM I can add the registries to it in a few days and then we will have to work out a way to get it back to you (more than likily will just E-mail the saucers back to you).

The name is the U.S.S. Bass Master but he listed no NCC-????(?) any ideas on the numbers he wanted?

[atheorhaven]

I can do these up as well if you wish.. already have the blanks done up, so they could be done by tomorrow..

[DarkMatrix]

Quote:
I can do these up as well if you wish.. already have the blanks done up, so they could be done by tomorrow..  

that be cool Mr a

DM

[olbuzzard]

Gentlemen ..  I'm greatly humbled...  Thanks so much for the work.  I knew  that the unsual hull structure would be a little hard to come by...  mostly due to the "oversized engineering section"....  I knew it might be tough to come up with that one.  As well, the warp drive naucells are  a bit curious  ...  yes they were from  TOS ..  TNG   and my own idea of doubling the warp drives on each side ...  hense the unusual idea of the warp field generators going across form side to side on each naucell as well as in groups of 2's...  (please note there are 4 on each naucell)  

These comments are in no way ment to be critical.  I am deeply appreciative  that you have taken time to do this.  Once completed we will then load this into a seperate disk for safe keeping along with a SFC ship list so it can  be used.

If for any reason you are able to add the oddly designed concept to the current warp naucess you have  that would be great.  Also ..  just a suggestion...  see if can move the pilons they are on futher to the out side..  ( it gives itthe look of an over all lower profile)

AS for the markings ...  if you can get the 9th fleet logo (used in my sig)  on there some where ( I'm thinking on the pilons somewhere)  and its number as "NCC-1952"  (only if that is NOT TOO inappropriate with the SFC cannon)

BTW...  once we get the plastic version fo this done we will post some picts

Again ..  thanks

If I had the programs available I would enjoy the challange of helping some of you on some of your projects.  I can still do conceptual ideas ..  though they be cut and paste stuff..  But hardly the class of work you can do...  

I'm starting to ramble...   great stuff guys.  We'll pop back in later.

Again Thanks !!!  

[olbuzzard]

I had to come back and look one more time before bed...  hehehe  Great stuff  ...  I'm worse than a little kid at Christmas time ...  "just can't wait"

[DarkMatrix]

olbuzzard

atheorhaven now has all the files to finish her off for name and numbers should not be too long there

if we drop the  pilons lower the torptube will hit the bride when it fires i did tr and get it as lower as you had it only other way i see if we make the bridge smaller?

np adding your logo we do that too

DM

 

[Captain Ron]

heh, heh as soon as shes up I will take a crack at retexturing her as well

[olbuzzard]

My apologies for the inadequate description of the naucell and pylon relocation...  I hope you dont mind my taking the liberty of doing a little cut and paste to illustrate what we were talking about.  I know you have already spent a great deal of time on this project...  sooo if we are speaking out of turn ...  just let me know.  At any rate here is what we had in mind...  (it should be futher noted that we realize that this will also affect the positioning of the pylons in the area that they are phyically attached to the primary hull as well.)

Again ..  my thanks for your indulgence and your paitence.

 

[olbuzzard]

not quite sure what the problem is guys... but we are experiencing some trouble with out ISP ..  and my web site. Please continue with your work and let me know what progress has been made.

Thanks

[atheorhaven]

Okay, it's almost finished.. got it almost complete yesterday, just have to add the Fleet logo to the pylon.

(doing this image post from my ISP page which has only a teeny amount of space)


Should be complete by tonight... and sorry for the delay, between getting set up for my new job and trying to get my van running (and in-laws in town),  I've not had an excessive amount of time for much else..