Topic: Alexander Class Dreadnought (Read 1679 times)

Klingon Fanatic · « **on:** September 01, 2003, 06:19:17 pm »

With all these new TMP Federation dreadnoughts showing up, let us not forget the Alexander Class FDN:

DarkMatrix made this fine TMP Federation dreadnought using P81's Reliant and Connies. The registry says USS Ascension at the present time as the original saucer was blank. As the Unimatrix is down, I feel it was too important to let this ship and others he made/kitbasehd or converted go.

Again, this is Version 2 of DarkMatrix's Alexander class based on John Payne's USS Belisarius. Pictures of the physical model are here: http://members.fortunecity.com/jpayne/trekpage_belisarius.html

You can get it here: http://www.stcd.sgnonline.com/network/sfcmods.htm Until the site news is updated do a search for "Alexander class" and you are there.

Hopefully, The DucttapeWonder will post this on his site too.

Qapla!

KF

Alexander1701 · « **Reply #1 on:** September 01, 2003, 06:23:14 pm »

lol. This is the third Alexander class vessel. One's on the TNZ (after myself), one's a sov with holes in it, and now this one.

lol

Alexander

Marauth · « **Reply #2 on:** September 01, 2003, 07:04:02 pm »

Don't worry KF, once I get some motivation to look at the model I'll see if I can bash together a C8 in the SFB style using Moons K'T'inga, or if WZ gets around to doing one as he said he might (in the Ulysses thread) then I'll use that, depends on how long it takes me to finish all the feds I got...

NannerSlug · « **Reply #3 on:** September 01, 2003, 07:10:25 pm »

any chance if you KB a klingon dread in the tos era that it might not have those dishes on it?

im looking for a TOS dread for the klingons without one.

thanks.

Klingon Fanatic · « **Reply #4 on:** September 01, 2003, 07:11:50 pm »

Quote:

Don't worry KF, once I get some motivation to look at the model I'll see if I can bash together a C8 in the SFB style using Moons K'T'inga, or if WZ gets around to doing one as he said he might (in the Ulysses thread) then I'll use that, depends on how long it takes me to finish all the feds I got...

TVL,

I would MUCH rather see you spend your energy on a Suvwi' Qeh. Currently, there are two versions: Cromwell/Cleeves version and the KA Conversion by DarkMatrix.

Qapla!

KF

Marauth · « **Reply #5 on:** September 01, 2003, 07:37:52 pm »

Yeah but as I have explained in the past I can't make new meshes only kitbash so a Suvwi'Qeh would be a bit beyond me right now, if I can acquire a copy of Max or something then I would gladly learn it and make a Suvwi'Qeh but unless I stumble on a few grand to buy it, or pirate it (which everyone here frowns upon I would assume?) then I wont be getting it anytime soon.

WickedZombie45 · « **Reply #6 on:** September 01, 2003, 07:43:33 pm »

Ya know KF, the Suvvie happens to be one of my favorite Klink designs....

Fire Blade · « **Reply #8 on:** September 02, 2003, 09:00:25 pm »

that is one cool ship thanks

Fire Blade · « **Reply #9 on:** September 03, 2003, 12:42:53 pm »

bump

Ducttapewonder · « **Reply #10 on:** September 08, 2003, 02:32:49 am »

Hey KF, Would'nt mind shooting this one over to me would you?

Atrahasis · « **Reply #11 on:** September 08, 2003, 04:40:45 am »

Dang, for a while I was confusing Lestat with Lord Shtupp, who made those TOS ships I was thinking of. :P

starforce2 · « **Reply #12 on:** September 08, 2003, 06:34:16 am »

hey KF, since you seem to be a fan of these, you wouldn't happen to know what became of the lion that was in the works?
http://www.inpayne.com/models/kitbash/trekpage_lion.html
I remember someone here had one I thought was nearly done.

Klingon Fanatic

Re: Alexander Class Dreadnought

News: