Topic: Cheyenne Class WIP (Read 4976 times)

sandman69247 · « **on:** June 24, 2003, 06:41:54 pm »

Thought I lost this when my power supply went, but I found it intact. Mesh was done a while ago, but just started working on textures. As I've stated before, my texturing sux, thought I am getting better...so if you like the model but not the textures, re-work 'em after I release her.

Also, these textures will probably suck worse since this is the 1st time in a couple months I've done anything...RL getting in the way and all.

BTW, don't get me wrong, these are just the beginnings of the texturing process...it should look alot better in a couple of days.

James Formo · « **Reply #1 on:** June 24, 2003, 07:33:09 pm »

I like the mesh. Glad to see you got a bit of time to work on it. Looking forward to its release.

LightDrone · « **Reply #2 on:** June 24, 2003, 10:54:54 pm »

WTF

I thought you had been modeling for a while, my god thats a piece of [censored]!!!

christ put some effort into it, or read a tutorial, but dont post crap like that

ChrsLWlstr · « **Reply #3 on:** June 24, 2003, 11:17:34 pm »

Quote:

WTF

I thought you had been modeling for a while, my god thats a piece of [censored]!!!

christ put some effort into it, or read a tutorial, but dont post crap like that

Marauth · « **Reply #4 on:** June 25, 2003, 08:37:01 am »

Didn't Taldren ban this prick after the 2 near-flame wars he's started? One of you admins get this f**ker's IP and ban him permanently. And circulate his IP to as many other message boards as you can find so they ban him too.

Kaenyne · « **Reply #5 on:** June 25, 2003, 09:46:16 am »

I agree?there is no place on this forum for insulting remarks and/or general unpleasantness.
I do npt want to lecture, but the forums are here to foster goodwil, friendships and creativity.

And Sandman...ignore the remarks this person made about your ship. They are not objective in purpose?Their sole purpose was to anger you.

Your ship gotten off to a fine start. I'm looking forward to seeing more pictures of your progress.

Reverend · « **Reply #6 on:** June 25, 2003, 09:58:54 am »

LightDrone... why dont you mkae a model? You're a nigger... why don't you go home and apologize to yur father and mother for being such waste o resources and a personal embarrassment and disappointment, if they haven't killed themselves because of you.

Marauth · « **Reply #7 on:** June 25, 2003, 01:38:16 pm »

Okay what's up with the rascist comments people!!? Don't rise to him, and don't lower yourself to his level. Now can we please get back to the ship?

sandman69247 · « **Reply #9 on:** June 25, 2003, 01:45:40 pm »

So speaketh the eternal slug...oh well, actually I feel honored. Lightdrone only does this to those that actually do something good, so I take it as a compliment. Beside, I shall not engage in a battle of wits with someone who come to the field unarmed. Oh, and if you're too dense to figure that out LD, it means you have the intelligence of a moth bouncing off of a hot light 'til you're ass gets burned.

To everyone else, thanx! This is really my 1st TNG style ship, and it's hard to get things right. I'm remembering some of the tricks I was starting to learn before my leave of absence, so it should start looking better soon. Despite the comments of LD, I feel good about the mesh, just the textures are bad. Until I get a better grip on things in Photoshop, I do a lot of the work in PSP, then tweak in PS.

More to come soon.

Anthony_Scott · « **Reply #10 on:** June 25, 2003, 02:27:43 pm »

Not bad so far...keep up the good work!

Pay no attention to dimwits and fools

Reverend · « **Reply #11 on:** June 25, 2003, 02:53:33 pm »

Oh my, that comment was not intended to be a slur, I wouldn't do that, but I do know that it is pretty punctual- got his attention:) Fight fire with fire, and all that. I wonder if you, Sandman, are going to put TNG-style nacelles, or TMP?

Marauth · « **Reply #12 on:** June 25, 2003, 03:57:56 pm »

Why would he put TMP nacelles on a Cheyenne? What did I miss here?

sandman69247 · « **Reply #13 on:** June 25, 2003, 08:37:00 pm »

The nacelles are how they are supposed to be, according to the shots at ex-astris scientia, except I made the bussards larger...they were only little dots at the front of nacelles, and I thought they would look better as they are now.

They are definitely TNG, as the class was designed as a companion scout for the Galaxy Class...unfortunately, not very effective in that role as it's top speed is lower than the Galaxy, so was reassigned as a Frigate. As such, I'm going to be making some changes to the canon look and fell to make it a more capable Frigate...canon is way overrated anyway.

Marauth · « **Reply #14 on:** June 26, 2003, 10:59:15 am »

Where did you get the info that it was slower than a Galaxy? It wont be from the show as nothing is known about it. Oh well. I personally really like the look of the studio model, and the bussards are not dots on the model, they are the front of a highlighter pen actually but...

Marauth · « **Reply #16 on:** June 26, 2003, 02:51:06 pm »

the DITL is a pile of crap quite frankly, I never use that site except for the occasional articles like the one on the Nemesis Enterprise. The stuff there is almost completely made up by the one guy writing the site and is very arbitrary, especially his opinions on the DS9TM kitbash ships.

Reverend · « **Reply #17 on:** June 26, 2003, 11:14:00 pm »

I had just asked about TMP nacelles because to my partially-Trek-educated eyes, I actually couldn't tell exactly what generation if any- no offense meant by my lack of intuition, just curious.
Oh, and and another additional comment to anyone who is curious, I got real loud real fast for Snadman- he was the first person to ever coach me on modding SFC series, and has always been patient with me, even when I could tell he didn't really feel like a '20 questions'' round- I owe it to him to be at his defense any day or time- you all know what I mean, right?

sandman69247 · « **Reply #18 on:** June 27, 2003, 01:14:00 am »

No offense taken or percieved.

This is taking longer than I thought, due to the "rust" faxtor...got rusty, not working on anything for so long.

I'm wondering if I should make an untextured ship file on my yahoo group...that way if you like a mesh I do and have some texturing skill, you can get the model a texture it yourself? Does that sound like it might work? I ask because I feel that my models don't get out there due to my lack of texturing skill...I have some untextured models moldering on my hd since I can't texture worth a %$#@. Let me know what you think, I have no problem with sharing credits...I welcome it, so that my stuff can get done. That way I can quietly work on my skills, then dazzle y'all with a work of art.

BTW, I have to re-work the whole texturing (thankfully I made a backup), as I screwed it up bad...forgot to do something and now it looks like something a Ferengi wouldn't give a 1/4 bar of latinum for.

COWABUNGAA DUDE!!

Klingon Fanatic · « **Reply #19 on:** June 27, 2003, 05:52:19 am »

Sandman,

Hey she's off to a great start!

Are you still working on the USS Remora Pataflafla sent you?

Qapla!

KF

News:

Topic: Cheyenne Class WIP (Read 4976 times) var addthis_config = {"data_track_clickback":true};

sandman69247

James Formo

LightDrone

ChrsLWlstr

Marauth

Kaenyne

Reverend

Marauth

Mackie

sandman69247

Anthony_Scott

Reverend

Marauth

sandman69247

Marauth

sandman69247

Marauth

Reverend

sandman69247

Klingon Fanatic

Topic: Cheyenne Class WIP (Read 4976 times)